[linux-sunxi] Re: [PATCH v2 3/7] mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit

[Lee Jones]

> > >> The PRCM (Power/Reset/Clock Management) block exposes several subdevices
> > >> in different subsystems (clk, reset ...)
> > >>
> > >> Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks)
> > >> and reset controller subdevices.
> > >>
> > >> Other subdevices might be added later (if needed).
> > >>
> > >> Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> > >> ---
> > >>  drivers/mfd/Kconfig      |   8 +++
> > >>  drivers/mfd/Makefile     |   1 +
> > >>  drivers/mfd/sun6i-prcm.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++
> > >>  3 files changed, 160 insertions(+)
> > >>  create mode 100644 drivers/mfd/sun6i-prcm.c
> > > [...]
> > >
> > >> +#include <linux/module.h>
> > >> +#include <linux/kernel.h>
> > >> +#include <linux/errno.h>
> > >> +#include <linux/err.h>
> > >> +#include <linux/spinlock.h>
> > >> +#include <linux/io.h>
> > >> +#include <linux/slab.h>
> > >> +#include <linux/mutex.h>
> > >> +#include <linux/completion.h>
> > >> +#include <linux/irq.h>
> > >> +#include <linux/jiffies.h>
> > >> +#include <linux/bitops.h>
> > >> +#include <linux/fs.h>
> > >> +#include <linux/of.h>
> > >> +#include <linux/of_irq.h>
> > >> +#include <linux/platform_device.h>
> > >> +#include <linux/uaccess.h>
> > >> +#include <linux/mfd/core.h>
> > > I'm pretty sure you don't need half of these.  Please only add the
> > > ones you make use of.
> > 
> > Sure (this is what happens when you copy/paste from another driver :-))
> 
> Also, alphabetic order would be nice.

No, please don't do that, it's a waste of time.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog