[linux-sunxi] Re: [PATCH v2 3/7] mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit

[Priit Laes]

Ühel kenal päeval, N, 08.05.2014 kell 22:04, kirjutas Boris BREZILLON:
> On 08/05/2014 13:02, Lee Jones wrote:
> >> The PRCM (Power/Reset/Clock Management) block exposes several subdevices
> >> in different subsystems (clk, reset ...)
> >>
> >> Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks)
> >> and reset controller subdevices.
> >>
> >> Other subdevices might be added later (if needed).
> >>
> >> Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> >> ---
> >>  drivers/mfd/Kconfig      |   8 +++
> >>  drivers/mfd/Makefile     |   1 +
> >>  drivers/mfd/sun6i-prcm.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++
> >>  3 files changed, 160 insertions(+)
> >>  create mode 100644 drivers/mfd/sun6i-prcm.c
> > [...]
> >
> >> +#include <linux/module.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/errno.h>
> >> +#include <linux/err.h>
> >> +#include <linux/spinlock.h>
> >> +#include <linux/io.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/mutex.h>
> >> +#include <linux/completion.h>
> >> +#include <linux/irq.h>
> >> +#include <linux/jiffies.h>
> >> +#include <linux/bitops.h>
> >> +#include <linux/fs.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_irq.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/uaccess.h>
> >> +#include <linux/mfd/core.h>
> > I'm pretty sure you don't need half of these.  Please only add the
> > ones you make use of.
> 
> Sure (this is what happens when you copy/paste from another driver :-))

Also, alphabetic order would be nice.

Päikest,
Priit Laes :)