[PATCH 05/17] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller

[Kishon Vijay Abraham I]

Hi,

On Tuesday 06 May 2014 10:05 PM, Jason Gunthorpe wrote:
> On Tue, May 06, 2014 at 07:03:51PM +0530, Kishon Vijay Abraham I wrote:
>> +Example:
>> +pcie at 51000000 {
>> +	compatible = "ti,dra7xx-pcie";
>> +	reg = <0x51002000 0x14c>, <0x51000000 0x2000>;
>> +	reg-names = "ti_conf", "rc_dbics";
>> +	interrupts = <0 232 0x4>, <0 233 0x4>;
>> +	#address-cells = <3>;
>> +	#size-cells = <2>;
>> +	device_type = "pci";
>> +	ti,device_type = <3>;
>> +	ranges = <0x00000800 0 0x20001000 0x20001000 0 0x00002000  /* Configuration Space */
> 
> Configuration space should not show up in the ranges, please don't
> copy that mistake from other drivers, put it in reg.

But then it needs pcie-designware.c to be modified and it will be breaking
other platforms no?
> 
>> +	interrupt-map-mask = <0 0 0 0>;
>> +	interrupt-map = <0x0 0 &gic 134>;
> 
> The HW cannot decode INTA/B/C/D?
> 
>> +#define	PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI		0x0034
>> +#define	PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI		0x0038
>> +#define	INTA						BIT(0)
>> +#define	INTB						BIT(1)
>> +#define	INTC						BIT(2)
>> +#define	INTD						BIT(3)
>> +#define	MSI						BIT(4)
>> +#define	LEG_EP_INTERRUPTS (INTA | INTB | INTC | INTD)
> 
> Oh, it can, it would be wise to export this from the driver. Look at
> the latest patches from Srikanth Thokala for the Xilinx PCI driver to
> see how this should look

ok.. will have a look at it.

Thanks
Kishon