[PATCH v6 0/2] clk: exynos: add support for exynos5260 SoC

[Rahul Sharma]

Thanks Tomasz,

Please let me know if any concern.
Meanwhile I will post dt patches with "clock" and "clock-names" properties
added for each controller node.

Regards,
Rahul Sharma.


On 24 March 2014 03:50, Tomasz Figa <tomasz.figa at gmail.com> wrote:
> Hi Rahul,
>
>
> On 23.03.2014 21:45, Rahul Sharma wrote:
>>
>> From: Rahul Sharma <Rahul.Sharma at samsung.com>
>>
>> Add clock support for exynos5260 SoC.
>>
>> This series is based on Tomasz Figa's samsung-next branch.
>>
>> V6:
>>    1) Listed external Clocks in documentation file.
>>    2) Listed Input Clocks for each clock controller in
>> exynos5260-clock.txt.
>>    3) Added Clock and Clock-names properties.
>>    4) Assigned IDs to all clocks in the clock file.
>>    5) Moved all PHY clocks as fixed rate to the driver file.
>>    6) Reorder clocks to maintain acscending order on the basis of clock
>>    register offset and bit numer.
>>
>> V5:
>>    1) Include S3c2412 and S3c2443 in clock provider patch.
>>    2) Added SCLK_TOP_FIMD with CLK_IGNORE_UNUSED due to Suspend
>>    failure.
>>    3) Moved exynos5260-clk.h to include/dt-bindings/clock.
>>    4) Fix exynos5260_clk_sleep_init protoype for PM disabled.W
>>    5) Moved fixed clock registeration to DT.
>>    6) Removed CLK_IGNORE_UNUSED flags from UART clocks. Earlier
>>    facing issues because of RFS probing all TTYs.
>>
>> V4:
>>    1) Rework clock file as per Tomasz review comments at
>>          http://www.spinics.net/lists/arm-kernel/msg310116.html.
>>
>> V3:
>>    1) Removed "samsung,exynos5260-clock" property from clock files.
>>    2) Replaced "__SPIN_LOCK_UNLOCKED(lock)" with spin_lock_init.
>>    3) Removed '(' and ')' around numeric constants in macros.
>>
>> V2:
>>    1) Move suspend resume handling to Exynos5410 Clock file.
>>    2) Removed Unused Macros and Condition checks for Exynos5260.
>>    3) Add spin lock to clock provider context.
>>    4) Add clock provider context for Exynos5410.
>>    5) Uniform implementation for callbacks for PLL2550xx.
>>    6) Split Exynos5260 clock file patch to bring it under 100 Kb limit.
>>    7) Replace aclk/pclk/hclk gates with combined gates.
>>    8) Remove CLK_IGNORE_UNUSED flag for gate clocks.
>>
>> Rahul Sharma (2):
>>    clk/exynos5260: add macros and documentation for exynos5260
>>    clk/exynos5260: add clock file for exynos5260
>>
>>   .../devicetree/bindings/clock/exynos5260-clock.txt |  190 ++
>>   drivers/clk/samsung/Makefile                       |    1 +
>>   drivers/clk/samsung/clk-exynos5260.c               | 1980
>> ++++++++++++++++++++
>>   drivers/clk/samsung/clk-exynos5260.h               |  459 +++++
>>   include/dt-bindings/clock/exynos5260-clk.h         |  469 +++++
>>   5 files changed, 3099 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/clock/exynos5260-clock.txt
>>   create mode 100644 drivers/clk/samsung/clk-exynos5260.c
>>   create mode 100644 drivers/clk/samsung/clk-exynos5260.h
>>   create mode 100644 include/dt-bindings/clock/exynos5260-clk.h
>>
>
> Looks good to me, will apply if no comments show up for few more days.
>
> Best regards,
> Tomasz