[PATCH v6 0/2] clk: exynos: add support for exynos5260 SoC

[Tomasz Figa]

Hi Rahul,

On 23.03.2014 21:45, Rahul Sharma wrote:
> From: Rahul Sharma <Rahul.Sharma at samsung.com>
>
> Add clock support for exynos5260 SoC.
>
> This series is based on Tomasz Figa's samsung-next branch.
>
> V6:
>    1) Listed external Clocks in documentation file.
>    2) Listed Input Clocks for each clock controller in exynos5260-clock.txt.
>    3) Added Clock and Clock-names properties.
>    4) Assigned IDs to all clocks in the clock file.
>    5) Moved all PHY clocks as fixed rate to the driver file.
>    6) Reorder clocks to maintain acscending order on the basis of clock
>    register offset and bit numer.
>
> V5:
>    1) Include S3c2412 and S3c2443 in clock provider patch.
>    2) Added SCLK_TOP_FIMD with CLK_IGNORE_UNUSED due to Suspend
>    failure.
>    3) Moved exynos5260-clk.h to include/dt-bindings/clock.
>    4) Fix exynos5260_clk_sleep_init protoype for PM disabled.W
>    5) Moved fixed clock registeration to DT.
>    6) Removed CLK_IGNORE_UNUSED flags from UART clocks. Earlier
>    facing issues because of RFS probing all TTYs.
>
> V4:
>    1) Rework clock file as per Tomasz review comments at
>          http://www.spinics.net/lists/arm-kernel/msg310116.html.
>
> V3:
>    1) Removed "samsung,exynos5260-clock" property from clock files.
>    2) Replaced "__SPIN_LOCK_UNLOCKED(lock)" with spin_lock_init.
>    3) Removed '(' and ')' around numeric constants in macros.
>
> V2:
>    1) Move suspend resume handling to Exynos5410 Clock file.
>    2) Removed Unused Macros and Condition checks for Exynos5260.
>    3) Add spin lock to clock provider context.
>    4) Add clock provider context for Exynos5410.
>    5) Uniform implementation for callbacks for PLL2550xx.
>    6) Split Exynos5260 clock file patch to bring it under 100 Kb limit.
>    7) Replace aclk/pclk/hclk gates with combined gates.
>    8) Remove CLK_IGNORE_UNUSED flag for gate clocks.
>
> Rahul Sharma (2):
>    clk/exynos5260: add macros and documentation for exynos5260
>    clk/exynos5260: add clock file for exynos5260
>
>   .../devicetree/bindings/clock/exynos5260-clock.txt |  190 ++
>   drivers/clk/samsung/Makefile                       |    1 +
>   drivers/clk/samsung/clk-exynos5260.c               | 1980 ++++++++++++++++++++
>   drivers/clk/samsung/clk-exynos5260.h               |  459 +++++
>   include/dt-bindings/clock/exynos5260-clk.h         |  469 +++++
>   5 files changed, 3099 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/exynos5260-clock.txt
>   create mode 100644 drivers/clk/samsung/clk-exynos5260.c
>   create mode 100644 drivers/clk/samsung/clk-exynos5260.h
>   create mode 100644 include/dt-bindings/clock/exynos5260-clk.h
>

Looks good to me, will apply if no comments show up for few more days.

Best regards,
Tomasz