[PATCH v5 2/3] ARM: dts: add dts files for exynos5260 SoC
Rahul Sharma
r.sh.open at gmail.com
Thu Mar 13 01:06:27 EDT 2014
On 13 March 2014 06:28, Pankaj Dubey <pankaj.dubey at samsung.com> wrote:
> On 03/13/2014 12:16 AM, Rahul Sharma wrote:
>>
>> The patch adds the dts files for exynos5260.
>>
>> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
>> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
>> Signed-off-by: Arun Kumar K <arun.kk at samsung.com>
>> Reviewed-by: Tomasz Figa <t.figa at samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574
>> +++++++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos5260.dtsi | 400 ++++++++++++++++++++
>> 2 files changed, 974 insertions(+)
>> create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
>> create mode 100644 arch/arm/boot/dts/exynos5260.dtsi
>>
>> diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
>> b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
>> new file mode 100644
>> index 0000000..f6ee55e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
>> @@ -0,0 +1,574 @@
>> +/*
>> + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
>> + *
>> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as
>> device
>> + * tree nodes are listed in this file.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#define PIN_PULL_NONE 0
>> +#define PIN_PULL_DOWN 1
>> +#define PIN_PULL_UP 3
>> +
>> +&pinctrl_0 {
>> + gpa0: gpa0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpa1: gpa1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpa2: gpa2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb0: gpb0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb1: gpb1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb2: gpb2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb3: gpb3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb4: gpb4 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb5: gpb5 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd0: gpd0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd1: gpd1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd2: gpd2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpe0: gpe0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpe1: gpe1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf0: gpf0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf1: gpf1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpk0: gpk0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpx0: gpx0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpx1: gpx1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpx2: gpx2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpx3: gpx3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + uart0_data: uart0-data {
>> + samsung,pins = "gpa0-0", "gpa0-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + uart0_fctl: uart0-fctl {
>> + samsung,pins = "gpa0-2", "gpa0-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + uart1_data: uart1-data {
>> + samsung,pins = "gpa1-0", "gpa1-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + uart1_fctl: uart1-fctl {
>> + samsung,pins = "gpa1-2", "gpa1-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + uart2_data: uart2-data {
>> + samsung,pins = "gpa1-4", "gpa1-5";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + spi0_bus: spi0-bus {
>> + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + spi1_bus: spi1-bus {
>> + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + usb3_vbus0_en: usb3-vbus0-en {
>> + samsung,pins = "gpa2-4";
>> + samsung,pin-function = <1>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2s1_bus: i2s1-bus {
>> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
>> + "gpb0-4";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + pcm1_bus: pcm1-bus {
>> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
>> + "gpb0-4";
>> + samsung,pin-function = <3>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + spdif1_bus: spdif1-bus {
>> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
>> + samsung,pin-function = <4>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + spi2_bus: spi2-bus {
>> + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c0_hs_bus: i2c0-hs-bus {
>> + samsung,pins = "gpb3-0", "gpb3-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c1_hs_bus: i2c1-hs-bus {
>> + samsung,pins = "gpb3-2", "gpb3-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c2_hs_bus: i2c2-hs-bus {
>> + samsung,pins = "gpb3-4", "gpb3-5";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c3_hs_bus: i2c3-hs-bus {
>> + samsung,pins = "gpb3-6", "gpb3-7";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c4_bus: i2c4-bus {
>> + samsung,pins = "gpb4-0", "gpb4-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c5_bus: i2c5-bus {
>> + samsung,pins = "gpb4-2", "gpb4-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c6_bus: i2c6-bus {
>> + samsung,pins = "gpb4-4", "gpb4-5";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c7_bus: i2c7-bus {
>> + samsung,pins = "gpb4-6", "gpb4-7";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c8_bus: i2c8-bus {
>> + samsung,pins = "gpb5-0", "gpb5-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c9_bus: i2c9-bus {
>> + samsung,pins = "gpb5-2", "gpb5-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c10_bus: i2c10-bus {
>> + samsung,pins = "gpb5-4", "gpb5-5";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + i2c11_bus: i2c11-bus {
>> + samsung,pins = "gpb5-6", "gpb5-7";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + cam_gpio_a: cam-gpio-a {
>> + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
>> + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
>> + "gpe1-0", "gpe1-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + cam_gpio_b: cam-gpio-b {
>> + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
>> + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
>> + samsung,pin-function = <3>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + cam_i2c1_bus: cam-i2c1-bus {
>> + samsung,pins = "gpf0-2", "gpf0-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + cam_i2c0_bus: cam-i2c0-bus {
>> + samsung,pins = "gpf0-0", "gpf0-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + cam_spi0_bus: cam-spi0-bus {
>> + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +
>> + cam_spi1_bus: cam-spi1-bus {
>> + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <0>;
>> + };
>> +};
>> +
>> +&pinctrl_1 {
>> + gpc0: gpc0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpc1: gpc1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpc2: gpc2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpc3: gpc3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpc4: gpc4 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + sd0_clk: sd0-clk {
>> + samsung,pins = "gpc0-0";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd0_cmd: sd0-cmd {
>> + samsung,pins = "gpc0-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd0_bus1: sd0-bus-width1 {
>> + samsung,pins = "gpc0-2";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd0_bus4: sd0-bus-width4 {
>> + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd0_bus8: sd0-bus-width8 {
>> + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd0_rdqs: sd0-rdqs {
>> + samsung,pins = "gpc0-6";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd1_clk: sd1-clk {
>> + samsung,pins = "gpc1-0";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd1_cmd: sd1-cmd {
>> + samsung,pins = "gpc1-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd1_bus1: sd1-bus-width1 {
>> + samsung,pins = "gpc1-2";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd1_bus4: sd1-bus-width4 {
>> + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd1_bus8: sd1-bus-width8 {
>> + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd2_clk: sd2-clk {
>> + samsung,pins = "gpc2-0";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd2_cmd: sd2-cmd {
>> + samsung,pins = "gpc2-1";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_NONE>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd2_cd: sd2-cd {
>> + samsung,pins = "gpc2-2";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd2_bus1: sd2-bus-width1 {
>> + samsung,pins = "gpc2-3";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +
>> + sd2_bus4: sd2-bus-width4 {
>> + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
>> + samsung,pin-function = <2>;
>> + samsung,pin-pud = <PIN_PULL_UP>;
>> + samsung,pin-drv = <3>;
>> + };
>> +};
>> +
>> +&pinctrl_2 {
>> + gpz0: gpz0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpz1: gpz1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/exynos5260.dtsi
>> b/arch/arm/boot/dts/exynos5260.dtsi
>> new file mode 100644
>> index 0000000..a99ef77
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5260.dtsi
>> @@ -0,0 +1,400 @@
>> +/*
>> + * SAMSUNG EXYNOS5260 SoC device tree source
>> + *
>> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include "skeleton.dtsi"
>> +
>> +#include <dt-bindings/clock/exynos5260-clk.h>
>> +
>> +/ {
>> + compatible = "samsung,exynos5260";
>> + interrupt-parent = <&gic>;
>> +
>> + aliases {
>> + pinctrl0 = &pinctrl_0;
>> + pinctrl1 = &pinctrl_1;
>> + pinctrl2 = &pinctrl_2;
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a15";
>> + reg = <0x0>;
>> + cci-control-port = <&cci_control1>;
>> + };
>> +
>> + cpu at 1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a15";
>> + reg = <0x1>;
>> + cci-control-port = <&cci_control1>;
>> + };
>> +
>> + cpu at 100 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x100>;
>> + cci-control-port = <&cci_control0>;
>> + };
>> +
>> + cpu at 101 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x101>;
>> + cci-control-port = <&cci_control0>;
>> + };
>> +
>> + cpu at 102 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x102>;
>> + cci-control-port = <&cci_control0>;
>> + };
>> +
>> + cpu at 103 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x103>;
>> + cci-control-port = <&cci_control0>;
>> + };
>> + };
>> +
>> + soc: soc {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + clock_top: clock-controller at 10010000 {
>> + compatible = "samsung,exynos5260-clock-top";
>> + reg = <0x10010000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_peri: clock-controller at 10200000 {
>> + compatible = "samsung,exynos5260-clock-peri";
>> + reg = <0x10200000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_egl: clock-controller at 10600000 {
>> + compatible = "samsung,exynos5260-clock-egl";
>> + reg = <0x10600000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_kfc: clock-controller at 10700000 {
>> + compatible = "samsung,exynos5260-clock-kfc";
>> + reg = <0x10700000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_g2d: clock-controller at 10A00000 {
>> + compatible = "samsung,exynos5260-clock-g2d";
>> + reg = <0x10A00000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_mif: clock-controller at 10CE0000 {
>> + compatible = "samsung,exynos5260-clock-mif";
>> + reg = <0x10CE0000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_mfc: clock-controller at 11090000 {
>> + compatible = "samsung,exynos5260-clock-mfc";
>> + reg = <0x11090000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_g3d: clock-controller at 11830000 {
>> + compatible = "samsung,exynos5260-clock-g3d";
>> + reg = <0x11830000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_fsys: clock-controller at 122E0000 {
>> + compatible = "samsung,exynos5260-clock-fsys";
>> + reg = <0x122E0000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_aud: clock-controller at 128C0000 {
>> + compatible = "samsung,exynos5260-clock-aud";
>> + reg = <0x128C0000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_isp: clock-controller at 133C0000 {
>> + compatible = "samsung,exynos5260-clock-isp";
>> + reg = <0x133C0000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_gscl: clock-controller at 13F00000 {
>> + compatible = "samsung,exynos5260-clock-gscl";
>> + reg = <0x13F00000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clock_disp: clock-controller at 14550000 {
>> + compatible = "samsung,exynos5260-clock-disp";
>> + reg = <0x14550000 0x10000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + clocks {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
>
> Even though you added #address-cells property I can not see "reg" property
> in any of "fixed-clock".
> Isn't it better either we can remove this or add "reg" property?
> Also all these fixed-clock are missing #clock-cells property.
>
Since it is a soc level addition, I enabled provision for adding reg
property for
fixed clocks in boards files (or in SoC file).
Regards,
Rahul Sharma.
>> +
>> + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd {
>> + compatible = "fixed-clock";
>> + clock-frequency = <270000000>;
>> + clock-output-names =
>> "phyclk_dptx_phy_ch0_txd_clk";
>> + };
>> +
>> + dptx_phy_ch1: phyclk_dptx_phy_ch1_txd {
>> + compatible = "fixed-clock";
>> + clock-frequency = <270000000>;
>> + clock-output-names =
>> "phyclk_dptx_phy_ch1_txd_clk";
>> + };
>> +
>> + dptx_phy_ch2: phyclk_dptx_phy_ch2_txd {
>> + compatible = "fixed-clock";
>> + clock-frequency = <270000000>;
>> + clock-output-names =
>> "phyclk_dptx_phy_ch2_txd_clk";
>> + };
>> +
>> + dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <270000000>;
>> + clock-output-names =
>> "phyclk_dptx_phy_ch3_txd_clk";
>> + };
>> +
>> + hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko {
>> + compatible = "fixed-clock";
>> + clock-frequency = <250000000>;
>> + clock-output-names =
>> "phyclk_hdmi_phy_tmds_clko";
>> + };
>> +
>> + hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko {
>> + compatible = "fixed-clock";
>> + clock-frequency = <166000000>;
>> + clock-output-names =
>> "phyclk_hdmi_phy_pixel_clko";
>> + };
>> +
>> + hdmi_link_tmds_clkhi:
>> phyclk_hdmi_link_o_tmds_clkhi {
>> + compatible = "fixed-clock";
>> + clock-frequency = <125000000>;
>> + clock-output-names =
>> "phyclk_hdmi_link_o_tmds_clkhi";
>> + };
>> +
>> + dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names =
>> "phyclk_dptx_phy_o_ref_clk_24m";
>> + };
>> +
>> + dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 {
>> + compatible = "fixed-clock";
>> + clock-frequency = <135000000>;
>> + clock-output-names =
>> "phyclk_dptx_phy_clk_div2";
>> + };
>> +
>> + mipi_dphy_rxclkesc0:
>> phyclk_mipi_dphy_4l_m_rxclkesc0 {
>> + compatible = "fixed-clock";
>> + clock-frequency = <20000000>;
>> + clock-output-names =
>> "phyclk_mipi_dphy_4l_m_rxclkesc0";
>> + };
>> +
>> + usbhost20_phy_phyclock:
>> phyclk_usbhost20_phy_phyclock {
>> + compatible = "fixed-clock";
>> + clock-frequency = <60000000>;
>> + clock-output-names =
>> "phyclk_usbhost20_phy_phyclock";
>> + };
>> +
>> + usbhost20_phy_freeclk:
>> phyclk_usbhost20_phy_freeclk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <60000000>;
>> + clock-output-names =
>> "phyclk_usbhost20_phy_freeclk";
>> + };
>> +
>> + usbhost20_phy_clk48mohci:
>> phyclk_usbhost20_phy_clk48mohci {
>> + compatible = "fixed-clock";
>> + clock-frequency = <48000000>;
>> + clock-output-names =
>> "phyclk_usbhost20_phy_clk48mohci";
>> + };
>> +
>> + usbdrd30_pipe_pclk:
>> phyclk_usbdrd30_udrd30_pipe_pclk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <125000000>;
>> + clock-output-names =
>> "phyclk_usbdrd30_udrd30_pipe_pclk";
>> + };
>> +
>> + usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock
>> {
>> + compatible = "fixed-clock";
>> + clock-frequency = <60000000>;
>> + clock-output-names =
>> "phyclk_usbdrd30_udrd30_phyclock";
>> + };
>> + };
>> +
>> + gic: interrupt-controller at 10481000 {
>> + compatible = "arm,cortex-a15-gic",
>> "arm,cortex-a9-gic";
>> + #interrupt-cells = <3>;
>> + #address-cells = <0>;
>> + #size-cells = <0>;
>> + interrupt-controller;
>> + reg = <0x10481000 0x1000>,
>> + <0x10482000 0x1000>,
>> + <0x10484000 0x2000>,
>> + <0x10486000 0x2000>;
>> + interrupts = <1 9 0xf04>;
>> + };
>> +
>> + chipid: chipid at 10000000 {
>> + compatible = "samsung,exynos4210-chipid";
>> + reg = <0x10000000 0x100>;
>> + };
>> +
>> + mct: mct at 100B0000 {
>> + compatible = "samsung,exynos4210-mct";
>> + reg = <0x100B0000 0x1000>;
>> + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
>> + clock-names = "fin_pll", "mct";
>> + interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
>> + <0 107 0>, <0 122 0>, <0 123 0>,
>> + <0 124 0>, <0 125 0>, <0 126 0>,
>> + <0 127 0>, <0 128 0>, <0 129 0>;
>> + };
>> +
>> + cci: cci at 10F00000 {
>> + compatible = "arm,cci-400";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0x10F00000 0x1000>;
>> + ranges = <0x0 0x10F00000 0x6000>;
>> +
>> + cci_control0: slave-if at 4000 {
>> + compatible = "arm,cci-400-ctrl-if";
>> + interface-type = "ace";
>> + reg = <0x4000 0x1000>;
>> + };
>> +
>> + cci_control1: slave-if at 5000 {
>> + compatible = "arm,cci-400-ctrl-if";
>> + interface-type = "ace";
>> + reg = <0x5000 0x1000>;
>> + };
>> + };
>> +
>> + pinctrl_0: pinctrl at 11600000 {
>> + compatible = "samsung,exynos5260-pinctrl";
>> + reg = <0x11600000 0x1000>;
>> + interrupts = <0 79 0>;
>> +
>> + wakeup-interrupt-controller {
>> + compatible =
>> "samsung,exynos4210-wakeup-eint";
>> + interrupt-parent = <&gic>;
>> + interrupts = <0 32 0>;
>> + };
>> + };
>> +
>> + pinctrl_1: pinctrl at 12290000 {
>> + compatible = "samsung,exynos5260-pinctrl";
>> + reg = <0x12290000 0x1000>;
>> + interrupts = <0 157 0>;
>> + };
>> +
>> + pinctrl_2: pinctrl at 128B0000 {
>> + compatible = "samsung,exynos5260-pinctrl";
>> + reg = <0x128B0000 0x1000>;
>> + interrupts = <0 243 0>;
>> + };
>> +
>> + uart0: serial at 12C00000 {
>> + compatible = "samsung,exynos4210-uart";
>> + reg = <0x12C00000 0x100>;
>> + interrupts = <0 146 0>;
>> + clocks = <&clock_peri PERI_CLK_UART0>,
>> <&clock_peri PERI_SCLK_UART0>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial at 12C10000 {
>> + compatible = "samsung,exynos4210-uart";
>> + reg = <0x12C10000 0x100>;
>> + interrupts = <0 147 0>;
>> + clocks = <&clock_peri PERI_CLK_UART1>,
>> <&clock_peri PERI_SCLK_UART1>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial at 12C20000 {
>> + compatible = "samsung,exynos4210-uart";
>> + reg = <0x12C20000 0x100>;
>> + interrupts = <0 148 0>;
>> + clocks = <&clock_peri PERI_CLK_UART2>,
>> <&clock_peri PERI_SCLK_UART2>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + status = "disabled";
>> + };
>> +
>> + uart3: serial at 12860000 {
>> + compatible = "samsung,exynos4210-uart";
>> + reg = <0x12860000 0x100>;
>> + interrupts = <0 145 0>;
>> + clocks = <&clock_aud AUD_CLK_AUD_UART>,
>> <&clock_aud AUD_SCLK_AUD_UART>;
>> + clock-names = "uart", "clk_uart_baud0";
>> + status = "disabled";
>> + };
>> +
>> + mmc_0: mmc0 at 12140000 {
>> + compatible = "samsung,exynos5250-dw-mshc";
>> + reg = <0x12140000 0x2000>;
>> + interrupts = <0 156 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top
>> TOP_SCLK_MMC0>;
>> + clock-names = "biu", "ciu";
>> + fifo-depth = <64>;
>> + status = "disabled";
>> + };
>> +
>> + mmc_1: mmc1 at 12150000 {
>> + compatible = "samsung,exynos5250-dw-mshc";
>> + reg = <0x12150000 0x2000>;
>> + interrupts = <0 158 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top
>> TOP_SCLK_MMC1>;
>> + clock-names = "biu", "ciu";
>> + fifo-depth = <64>;
>> + status = "disabled";
>> + };
>> +
>> + mmc_2: mmc2 at 12160000 {
>> + compatible = "samsung,exynos5250-dw-mshc";
>> + reg = <0x12160000 0x2000>;
>> + interrupts = <0 159 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top
>> TOP_SCLK_MMC2>;
>> + clock-names = "biu", "ciu";
>> + fifo-depth = <64>;
>> + status = "disabled";
>> + };
>> + };
>> +};
>> +
>> +#include "exynos5260-pinctrl.dtsi"
>
>
>
> --
> Best Regards,
> Pankaj Dubey
>
More information about the linux-arm-kernel
mailing list