[PATCH v5 2/3] ARM: dts: add dts files for exynos5260 SoC
Pankaj Dubey
pankaj.dubey at samsung.com
Wed Mar 12 20:58:54 EDT 2014
On 03/13/2014 12:16 AM, Rahul Sharma wrote:
> The patch adds the dts files for exynos5260.
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
> Signed-off-by: Arun Kumar K <arun.kk at samsung.com>
> Reviewed-by: Tomasz Figa <t.figa at samsung.com>
> ---
> arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5260.dtsi | 400 ++++++++++++++++++++
> 2 files changed, 974 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/exynos5260.dtsi
>
> diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
> new file mode 100644
> index 0000000..f6ee55e
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
> @@ -0,0 +1,574 @@
> +/*
> + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
> + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#define PIN_PULL_NONE 0
> +#define PIN_PULL_DOWN 1
> +#define PIN_PULL_UP 3
> +
> +&pinctrl_0 {
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa2: gpa2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb0: gpb0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb1: gpb1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb2: gpb2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb3: gpb3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb4: gpb4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb5: gpb5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd0: gpd0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd1: gpd1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd2: gpd2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpe0: gpe0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpe1: gpe1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf0: gpf0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf1: gpf1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpk0: gpk0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx0: gpx0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx1: gpx1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx2: gpx2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx3: gpx3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + uart0_data: uart0-data {
> + samsung,pins = "gpa0-0", "gpa0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart0_fctl: uart0-fctl {
> + samsung,pins = "gpa0-2", "gpa0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart1_data: uart1-data {
> + samsung,pins = "gpa1-0", "gpa1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart1_fctl: uart1-fctl {
> + samsung,pins = "gpa1-2", "gpa1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart2_data: uart2-data {
> + samsung,pins = "gpa1-4", "gpa1-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi0_bus: spi0-bus {
> + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi1_bus: spi1-bus {
> + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + usb3_vbus0_en: usb3-vbus0-en {
> + samsung,pins = "gpa2-4";
> + samsung,pin-function = <1>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2s1_bus: i2s1-bus {
> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
> + "gpb0-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm1_bus: pcm1-bus {
> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
> + "gpb0-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spdif1_bus: spdif1-bus {
> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi2_bus: spi2-bus {
> + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c0_hs_bus: i2c0-hs-bus {
> + samsung,pins = "gpb3-0", "gpb3-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c1_hs_bus: i2c1-hs-bus {
> + samsung,pins = "gpb3-2", "gpb3-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c2_hs_bus: i2c2-hs-bus {
> + samsung,pins = "gpb3-4", "gpb3-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c3_hs_bus: i2c3-hs-bus {
> + samsung,pins = "gpb3-6", "gpb3-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c4_bus: i2c4-bus {
> + samsung,pins = "gpb4-0", "gpb4-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c5_bus: i2c5-bus {
> + samsung,pins = "gpb4-2", "gpb4-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c6_bus: i2c6-bus {
> + samsung,pins = "gpb4-4", "gpb4-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c7_bus: i2c7-bus {
> + samsung,pins = "gpb4-6", "gpb4-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c8_bus: i2c8-bus {
> + samsung,pins = "gpb5-0", "gpb5-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c9_bus: i2c9-bus {
> + samsung,pins = "gpb5-2", "gpb5-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c10_bus: i2c10-bus {
> + samsung,pins = "gpb5-4", "gpb5-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c11_bus: i2c11-bus {
> + samsung,pins = "gpb5-6", "gpb5-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_gpio_a: cam-gpio-a {
> + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
> + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
> + "gpe1-0", "gpe1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_gpio_b: cam-gpio-b {
> + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
> + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_i2c1_bus: cam-i2c1-bus {
> + samsung,pins = "gpf0-2", "gpf0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_i2c0_bus: cam-i2c0-bus {
> + samsung,pins = "gpf0-0", "gpf0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_spi0_bus: cam-spi0-bus {
> + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_spi1_bus: cam-spi1-bus {
> + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> +&pinctrl_1 {
> + gpc0: gpc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc1: gpc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc2: gpc2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc3: gpc3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc4: gpc4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd0_clk: sd0-clk {
> + samsung,pins = "gpc0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cmd: sd0-cmd {
> + samsung,pins = "gpc0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus1: sd0-bus-width1 {
> + samsung,pins = "gpc0-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus4: sd0-bus-width4 {
> + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus8: sd0-bus-width8 {
> + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_rdqs: sd0-rdqs {
> + samsung,pins = "gpc0-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_clk: sd1-clk {
> + samsung,pins = "gpc1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cmd: sd1-cmd {
> + samsung,pins = "gpc1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus1: sd1-bus-width1 {
> + samsung,pins = "gpc1-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus4: sd1-bus-width4 {
> + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus8: sd1-bus-width8 {
> + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_clk: sd2-clk {
> + samsung,pins = "gpc2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cmd: sd2-cmd {
> + samsung,pins = "gpc2-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_NONE>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cd: sd2-cd {
> + samsung,pins = "gpc2-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus1: sd2-bus-width1 {
> + samsung,pins = "gpc2-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus4: sd2-bus-width4 {
> + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <PIN_PULL_UP>;
> + samsung,pin-drv = <3>;
> + };
> +};
> +
> +&pinctrl_2 {
> + gpz0: gpz0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpz1: gpz1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
> new file mode 100644
> index 0000000..a99ef77
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5260.dtsi
> @@ -0,0 +1,400 @@
> +/*
> + * SAMSUNG EXYNOS5260 SoC device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include "skeleton.dtsi"
> +
> +#include <dt-bindings/clock/exynos5260-clk.h>
> +
> +/ {
> + compatible = "samsung,exynos5260";
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + pinctrl0 = &pinctrl_0;
> + pinctrl1 = &pinctrl_1;
> + pinctrl2 = &pinctrl_2;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a15";
> + reg = <0x0>;
> + cci-control-port = <&cci_control1>;
> + };
> +
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a15";
> + reg = <0x1>;
> + cci-control-port = <&cci_control1>;
> + };
> +
> + cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x100>;
> + cci-control-port = <&cci_control0>;
> + };
> +
> + cpu at 101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x101>;
> + cci-control-port = <&cci_control0>;
> + };
> +
> + cpu at 102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x102>;
> + cci-control-port = <&cci_control0>;
> + };
> +
> + cpu at 103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x103>;
> + cci-control-port = <&cci_control0>;
> + };
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clock_top: clock-controller at 10010000 {
> + compatible = "samsung,exynos5260-clock-top";
> + reg = <0x10010000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_peri: clock-controller at 10200000 {
> + compatible = "samsung,exynos5260-clock-peri";
> + reg = <0x10200000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_egl: clock-controller at 10600000 {
> + compatible = "samsung,exynos5260-clock-egl";
> + reg = <0x10600000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_kfc: clock-controller at 10700000 {
> + compatible = "samsung,exynos5260-clock-kfc";
> + reg = <0x10700000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_g2d: clock-controller at 10A00000 {
> + compatible = "samsung,exynos5260-clock-g2d";
> + reg = <0x10A00000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_mif: clock-controller at 10CE0000 {
> + compatible = "samsung,exynos5260-clock-mif";
> + reg = <0x10CE0000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_mfc: clock-controller at 11090000 {
> + compatible = "samsung,exynos5260-clock-mfc";
> + reg = <0x11090000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_g3d: clock-controller at 11830000 {
> + compatible = "samsung,exynos5260-clock-g3d";
> + reg = <0x11830000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_fsys: clock-controller at 122E0000 {
> + compatible = "samsung,exynos5260-clock-fsys";
> + reg = <0x122E0000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_aud: clock-controller at 128C0000 {
> + compatible = "samsung,exynos5260-clock-aud";
> + reg = <0x128C0000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_isp: clock-controller at 133C0000 {
> + compatible = "samsung,exynos5260-clock-isp";
> + reg = <0x133C0000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_gscl: clock-controller at 13F00000 {
> + compatible = "samsung,exynos5260-clock-gscl";
> + reg = <0x13F00000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_disp: clock-controller at 14550000 {
> + compatible = "samsung,exynos5260-clock-disp";
> + reg = <0x14550000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clocks {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
Even though you added #address-cells property I can not see "reg" property in
any of "fixed-clock".
Isn't it better either we can remove this or add "reg" property?
Also all these fixed-clock are missing #clock-cells property.
> +
> + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd {
> + compatible = "fixed-clock";
> + clock-frequency = <270000000>;
> + clock-output-names = "phyclk_dptx_phy_ch0_txd_clk";
> + };
> +
> + dptx_phy_ch1: phyclk_dptx_phy_ch1_txd {
> + compatible = "fixed-clock";
> + clock-frequency = <270000000>;
> + clock-output-names = "phyclk_dptx_phy_ch1_txd_clk";
> + };
> +
> + dptx_phy_ch2: phyclk_dptx_phy_ch2_txd {
> + compatible = "fixed-clock";
> + clock-frequency = <270000000>;
> + clock-output-names = "phyclk_dptx_phy_ch2_txd_clk";
> + };
> +
> + dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <270000000>;
> + clock-output-names = "phyclk_dptx_phy_ch3_txd_clk";
> + };
> +
> + hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko {
> + compatible = "fixed-clock";
> + clock-frequency = <250000000>;
> + clock-output-names = "phyclk_hdmi_phy_tmds_clko";
> + };
> +
> + hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko {
> + compatible = "fixed-clock";
> + clock-frequency = <166000000>;
> + clock-output-names = "phyclk_hdmi_phy_pixel_clko";
> + };
> +
> + hdmi_link_tmds_clkhi: phyclk_hdmi_link_o_tmds_clkhi {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "phyclk_hdmi_link_o_tmds_clkhi";
> + };
> +
> + dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "phyclk_dptx_phy_o_ref_clk_24m";
> + };
> +
> + dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 {
> + compatible = "fixed-clock";
> + clock-frequency = <135000000>;
> + clock-output-names = "phyclk_dptx_phy_clk_div2";
> + };
> +
> + mipi_dphy_rxclkesc0: phyclk_mipi_dphy_4l_m_rxclkesc0 {
> + compatible = "fixed-clock";
> + clock-frequency = <20000000>;
> + clock-output-names = "phyclk_mipi_dphy_4l_m_rxclkesc0";
> + };
> +
> + usbhost20_phy_phyclock: phyclk_usbhost20_phy_phyclock {
> + compatible = "fixed-clock";
> + clock-frequency = <60000000>;
> + clock-output-names = "phyclk_usbhost20_phy_phyclock";
> + };
> +
> + usbhost20_phy_freeclk: phyclk_usbhost20_phy_freeclk {
> + compatible = "fixed-clock";
> + clock-frequency = <60000000>;
> + clock-output-names = "phyclk_usbhost20_phy_freeclk";
> + };
> +
> + usbhost20_phy_clk48mohci: phyclk_usbhost20_phy_clk48mohci {
> + compatible = "fixed-clock";
> + clock-frequency = <48000000>;
> + clock-output-names = "phyclk_usbhost20_phy_clk48mohci";
> + };
> +
> + usbdrd30_pipe_pclk: phyclk_usbdrd30_udrd30_pipe_pclk {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "phyclk_usbdrd30_udrd30_pipe_pclk";
> + };
> +
> + usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock {
> + compatible = "fixed-clock";
> + clock-frequency = <60000000>;
> + clock-output-names = "phyclk_usbdrd30_udrd30_phyclock";
> + };
> + };
> +
> + gic: interrupt-controller at 10481000 {
> + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + interrupt-controller;
> + reg = <0x10481000 0x1000>,
> + <0x10482000 0x1000>,
> + <0x10484000 0x2000>,
> + <0x10486000 0x2000>;
> + interrupts = <1 9 0xf04>;
> + };
> +
> + chipid: chipid at 10000000 {
> + compatible = "samsung,exynos4210-chipid";
> + reg = <0x10000000 0x100>;
> + };
> +
> + mct: mct at 100B0000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x100B0000 0x1000>;
> + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
> + clock-names = "fin_pll", "mct";
> + interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
> + <0 107 0>, <0 122 0>, <0 123 0>,
> + <0 124 0>, <0 125 0>, <0 126 0>,
> + <0 127 0>, <0 128 0>, <0 129 0>;
> + };
> +
> + cci: cci at 10F00000 {
> + compatible = "arm,cci-400";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x10F00000 0x1000>;
> + ranges = <0x0 0x10F00000 0x6000>;
> +
> + cci_control0: slave-if at 4000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x4000 0x1000>;
> + };
> +
> + cci_control1: slave-if at 5000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x5000 0x1000>;
> + };
> + };
> +
> + pinctrl_0: pinctrl at 11600000 {
> + compatible = "samsung,exynos5260-pinctrl";
> + reg = <0x11600000 0x1000>;
> + interrupts = <0 79 0>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos4210-wakeup-eint";
> + interrupt-parent = <&gic>;
> + interrupts = <0 32 0>;
> + };
> + };
> +
> + pinctrl_1: pinctrl at 12290000 {
> + compatible = "samsung,exynos5260-pinctrl";
> + reg = <0x12290000 0x1000>;
> + interrupts = <0 157 0>;
> + };
> +
> + pinctrl_2: pinctrl at 128B0000 {
> + compatible = "samsung,exynos5260-pinctrl";
> + reg = <0x128B0000 0x1000>;
> + interrupts = <0 243 0>;
> + };
> +
> + uart0: serial at 12C00000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x12C00000 0x100>;
> + interrupts = <0 146 0>;
> + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + uart1: serial at 12C10000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x12C10000 0x100>;
> + interrupts = <0 147 0>;
> + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + uart2: serial at 12C20000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x12C20000 0x100>;
> + interrupts = <0 148 0>;
> + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + uart3: serial at 12860000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x12860000 0x100>;
> + interrupts = <0 145 0>;
> + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + mmc_0: mmc0 at 12140000 {
> + compatible = "samsung,exynos5250-dw-mshc";
> + reg = <0x12140000 0x2000>;
> + interrupts = <0 156 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <64>;
> + status = "disabled";
> + };
> +
> + mmc_1: mmc1 at 12150000 {
> + compatible = "samsung,exynos5250-dw-mshc";
> + reg = <0x12150000 0x2000>;
> + interrupts = <0 158 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <64>;
> + status = "disabled";
> + };
> +
> + mmc_2: mmc2 at 12160000 {
> + compatible = "samsung,exynos5250-dw-mshc";
> + reg = <0x12160000 0x2000>;
> + interrupts = <0 159 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <64>;
> + status = "disabled";
> + };
> + };
> +};
> +
> +#include "exynos5260-pinctrl.dtsi"
--
Best Regards,
Pankaj Dubey
More information about the linux-arm-kernel
mailing list