[PATCH 2/9] ARM: dts: i.MX51: Add a second usbphy.

[Peter Chen]

On Fri, Mar 07, 2014 at 06:04:16PM +0100, Denis Carikli wrote:
> Signed-off-by: Denis Carikli <denis at eukrea.com>
> ---
>  arch/arm/boot/dts/imx51.dtsi |    8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
> index e508e6f..917b6ed 100644
> --- a/arch/arm/boot/dts/imx51.dtsi
> +++ b/arch/arm/boot/dts/imx51.dtsi
> @@ -100,6 +100,13 @@
>  			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
>  			clock-names = "main_clk";
>  		};
> +
> +		usbphy1: usbphy at 1 {
> +			compatible = "usb-nop-xceiv";
> +			reg = <1>;
> +			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
> +			clock-names = "main_clk";
> +		};

Is this the ulpi phy for host1 controller? Why the clock is the same with utmi phy
clock for otg controller.

>  	};
>  
>  	soc {
> @@ -239,6 +246,7 @@
>  				interrupts = <14>;
>  				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
>  				fsl,usbmisc = <&usbmisc 1>;
> +				fsl,usbphy = <&usbphy1>;
>  				status = "disabled";
>  			};
>  
> -- 
> 1.7.9.5
> 
> 
> 

-- 

Best Regards,
Peter Chen