[PATCH V4 00/16] irqchip: crossbar: Driver fixes

Jason Cooper jason at lakedaemon.net
Mon Jun 30 12:29:10 PDT 2014

On Thu, Jun 26, 2014 at 12:40:18PM +0530, Sricharan R wrote:
> This series does some cleanups, fixes for handling two interrupts
> getting mapped twice to same crossbar and provides support for
> hardwired IRQ and crossbar definitions.
> On certain platforms such as DRA7, SPIs 0, 1, 2, 3, 5, 6, 10,
> 131, 132, 133 are direct wired to hardware blocks bypassing
> crossbar. This quirky implementation is *NOT* supposed to be the
> expectation of crossbar hardware usage. This series adds support
> to represent such hard-wired irqs through DT and avoid generic
> allocation/programming of crossbar in the driver.
> This way of supporting hard-wired irqs was a result of
> the below discussions.
> http://www.spinics.net/lists/arm-kernel/msg329946.html
> Based on 3.16 rc2 mainline.
> All the patches are available here
>  git at github.com:Sricharanti/sricharan.git crossbar_updates
> The fixes series[1] earlier posted is merged in to this.
> [1] http://www.spinics.net/lists/arm-kernel/msg328273.html
> [V2] Merged the above series and rebased on 3.15 mainline
> [V3] Modified patch#3 to get irqs-skip properties from DT,
>      merged path#8 for checkpatch warning to other relevant
>      patches and fixed comments for other patches.
> [V4] Based on 3.16rc2 and fixed Jason's <jason at lakedaemon.net> comments.
> Nishanth Menon (14):
>   irqchip: crossbar: Dont use '0' to mark reserved interrupts
>   irqchip: crossbar: Check for premapped crossbar before allocating
>   irqchip: crossbar: Introduce ti,irqs-skip to skip irqs that bypass
>     crossbar
>   irqchip: crossbar: Initialise the crossbar with a safe value
>   irqchip: crossbar: Change allocation logic by reversing search for
>     free irqs
>   irqchip: crossbar: Remove IS_ERR_VALUE check
>   irqchip: crossbar: Fix sparse and checkpatch warnings
>   irqchip: crossbar: Fix kerneldoc warning
>   irqchip: crossbar: Return proper error value
>   irqchip: crossbar: Change the goto naming
>   irqchip: crossbar: Introduce ti,max-crossbar-sources to identify
>     valid crossbar mapping
>   irqchip: crossbar: Introduce centralized check for crossbar write
>   documentation: dt: omap: crossbar: Add description for interrupt
>     consumer
>   irqchip: crossbar: Allow for quirky hardware with direct hardwiring
>     of GIC
> Sricharan R (2):
>   irqchip: crossbar: Set cb pointer to null in case of error
>   irqchip: crossbar: Add kerneldoc for crossbar_domain_unmap callback
>  .../devicetree/bindings/arm/omap/crossbar.txt      |   36 +++++
>  drivers/irqchip/irq-crossbar.c                     |  168 +++++++++++++++++---
>  2 files changed, 179 insertions(+), 25 deletions(-)

Whole series applied to irqchip/crossbar, I'll give it a day or two in
-next, then I'll merge it into irqchip/core.

Tony: Right now, it's immutable unless you tell me I applied something
incorrectly.  Once it goes into irqchip/core, it's immutable no matter
what you say. ;-)



More information about the linux-arm-kernel mailing list