[PATCH V2] ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6

[Lee Jones]

> This patch fixes two problems: -
> 
> 1) The device tree isn't currently providing sti-ethclk which is
> required by the dwmac glue code to correctly configure the ethernet
> PHY clock speed.
> 
> This means depending on what the bootloader/jtag has
> configured this clock to, and what switch/hub the board is plugged
> into you most likely will NOT successfully negotiate a ethernet link.
> 
> 2) The stmmaceth clock was associated with the wrong clock. It was
> referencing the PHY clock rather than the interconnect clock which
> clocks the IP.
> 
> This patch also brings us closer to not having to boot the upstream
> kernel with the clk_ignore_unused parameter.
> 
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> ---
>  arch/arm/boot/dts/stih415.dtsi           | 8 ++++----
>  arch/arm/boot/dts/stih416.dtsi           | 8 ++++----
>  include/dt-bindings/clock/stih415-clks.h | 1 +
>  include/dt-bindings/clock/stih416-clks.h | 1 +
>  4 files changed, 10 insertions(+), 8 deletions(-)

Patch looks good to me now:

  Acked-by: Lee Jones <lee.jones at linaro.org>

> diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
> index d6f254f..a0f6f75 100644
> --- a/arch/arm/boot/dts/stih415.dtsi
> +++ b/arch/arm/boot/dts/stih415.dtsi
> @@ -169,8 +169,8 @@
>  
>  			pinctrl-names 	= "default";
>  			pinctrl-0	= <&pinctrl_mii0>;
> -			clock-names	= "stmmaceth";
> -			clocks		= <&clk_s_a1_ls CLK_GMAC0_PHY>;
> +			clock-names	= "stmmaceth", "sti-ethclk";
> +			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
>  		};
>  
>  		ethernet1: dwmac at fef08000 {
> @@ -192,8 +192,8 @@
>  			reset-names		= "stmmaceth";
>  			pinctrl-names 	= "default";
>  			pinctrl-0	= <&pinctrl_mii1>;
> -			clock-names	= "stmmaceth";
> -			clocks		= <&clk_s_a0_ls CLK_ETH1_PHY>;
> +			clock-names	= "stmmaceth", "sti-ethclk";
> +			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
>  		};
>  
>  		rc: rc at fe518000 {
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index 06473c5..84758d7 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -175,8 +175,8 @@
>  			reset-names		= "stmmaceth";
>  			pinctrl-names 	= "default";
>  			pinctrl-0	= <&pinctrl_mii0>;
> -			clock-names	= "stmmaceth";
> -			clocks		= <&clk_s_a1_ls CLK_GMAC0_PHY>;
> +			clock-names	= "stmmaceth", "sti-ethclk";
> +			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
>  		};
>  
>  		ethernet1: dwmac at fef08000 {
> @@ -197,8 +197,8 @@
>  			reset-names	= "stmmaceth";
>  			pinctrl-names 	= "default";
>  			pinctrl-0	= <&pinctrl_mii1>;
> -			clock-names	= "stmmaceth";
> -			clocks		= <&clk_s_a0_ls CLK_ETH1_PHY>;
> +			clock-names	= "stmmaceth", "sti-ethclk";
> +			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
>  		};
>  
>  		rc: rc at fe518000 {
> diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h
> index 0d2c739..d80caa6 100644
> --- a/include/dt-bindings/clock/stih415-clks.h
> +++ b/include/dt-bindings/clock/stih415-clks.h
> @@ -10,6 +10,7 @@
>  #define CLK_ETH1_PHY		4
>  
>  /* CLOCKGEN A1 */
> +#define CLK_ICN_IF_2		0
>  #define CLK_GMAC0_PHY		3
>  
>  #endif
> diff --git a/include/dt-bindings/clock/stih416-clks.h b/include/dt-bindings/clock/stih416-clks.h
> index 552c779..f9bdbd1 100644
> --- a/include/dt-bindings/clock/stih416-clks.h
> +++ b/include/dt-bindings/clock/stih416-clks.h
> @@ -10,6 +10,7 @@
>  #define CLK_ETH1_PHY		4
>  
>  /* CLOCKGEN A1 */
> +#define CLK_ICN_IF_2		0
>  #define CLK_GMAC0_PHY		3
>  
>  #endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog