[GIT PULL v2][for 3.17] pull request for hisilicon terminal soc

[xuwei]

On 2014/7/31 13:32, Olof Johansson wrote:
> Hi,
> 
> There were a few things that still needed fixing here -- I took care
> of most of them. See below.
> 
> 
> On Tue, Jul 29, 2014 at 12:44 AM, xuwei <xuwei5 at hisilicon.com> wrote:
>> Hi Olof, Hi Kevin, Hi Arnd,
>>
>> Please help to merge pull request for hisilicon terminal soc.
>>
>> Best Regards,
>> Wei
>>
>>
>> The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
>>
>>   Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
>>
>> are available in the git repository at:
>>
>>   git://github.com/hisilicon/linux-hisi.git tags/hix5hd2-for-3.17-v2
>>
>> for you to fetch changes up to eeea1ab9b53f311f634e87d9208daa564a97dbba:
>>
>>   ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
>>
>> ----------------------------------------------------------------
>> ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17
>>
>> - Rename Hi3716 to HiX5HD2
>> HiX5HD2 is a SoC with dual Cortex A9 cores for STB market.
>> And original Hi3xxx SoC is for mobile market.
>> To avoid confusing the two types of SoCs and also because of
>> different implementation(SMP, IPs integarted and earlycon configure),
>> rename Hi3716 to HIX5HD2 ann add ARCH_HIX5HD2.
>>
>> - Add HiX5HD2 STB SoC and development kit board support
>> - Change to use power reset driver to reboot for HiX5HD2
>> - Add ARCH_HISI for the common configure of hisilicon SoCs
>> - Change to use CPU_METHOD_OF_DECLARE for SMP on HiX5HD2 and hi3xxx
>> - Enable L2 aux value for Hi3620
>>
>> ----------------------------------------------------------------
>> Haifeng Yan (3):
>>       ARM: debug: Rename Hi3716 to HIX5HD2
>>       ARM: hisi: enable hix5hd2 SoC
>>       ARM: dts: Add hix5hd2-dkb dts file.

Hi Olof,

> It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems
> like there are references to both.

The full name is Hisilicon X5HD2.
But we also call it HIX5HD2.

> What I did was that I renamed the dts and dtsi to hisi-x5hd2  to have
> the vendor/family as prefix. Given the few boards per SoC family you
> have had so far, it makes more sense to prefix it with hisi.
> 

It is OK for us.
And we will follow the rule in the future.

>> Haojian Zhuang (5):
>>       ARM: hisi: add ARCH_HISI
>>       power: reset: move hisilicon reboot code
>>       ARM: config: enable ARCH_HIX5HD2
>>       ARM: hisi: set l2 aux for pl310
> 
> This patch makes no sense to still carry. If things still need to be
> resolved, then it should just be dropped.
> 
>>       ARM: hisi: remove smp from machine descriptor
> 
> 
> Also, in general: Wei, you seem to have added your Acked-by instead of
> Signed-off-by on the commits. When you apply them, you need to do so
> with your sign off.

Do you mean I need add both "Acked-by" and "Signed-off-by"?or just add "Signed-off-by"?

 
> What I have done is that I have applied most of the above patches
> directly instead of merging the branch, and I have done the touchups
> described above (dropped the L2 patch and renamed the dts/dtsi).
> 
> If for some reason, the name really should be hisi-hix5hd2, then let
> me know quickly so I can revisit before it goes in. But I don't thik
> so -- I find more hits with "x5hd2" out there than with "hix5hd2". If
> anything, the remaining traces of hix5hd2 should probably be renamed
> too (machine descriptor, etc).

It is OK with "x5hd2".

> (I also fixed a few spelling errors in the patch descriptions here and
> there, etc).

Thanks!

Best Regards,
Wei
 
> 
> -Olof
> 
> .
>