[PATCH v15 06/12] document: dt: add the binding on HiP04 clock

[Mark Rutland]

On Tue, Jul 29, 2014 at 03:25:49AM +0100, Haojian Zhuang wrote:
> On 29 July 2014 01:54, Mark Rutland <mark.rutland at arm.com> wrote:
> > On Mon, Jul 28, 2014 at 02:57:50PM +0100, Haojian Zhuang wrote:
> >> The DT binding for Hisilicon HiP04 clock driver.
> >>
> >> Signed-off-by: Haojian Zhuang <haojian.zhuang at linaro.org>
> >> ---
> >>  .../devicetree/bindings/clock/hip04-clock.txt        | 20 ++++++++++++++++++++
> >>  1 file changed, 20 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt
> >> new file mode 100644
> >> index 0000000..4d31ae3
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt
> >> @@ -0,0 +1,20 @@
> >> +* Hisilicon HiP04 Clock Controller
> >> +
> >> +The HiP04 clock controller generates and supplies clock to various
> >> +controllers within the HiP04 SoC.
> >> +
> >> +Required Properties:
> >> +
> >> +- compatible: should be one of the following.
> >> +  - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC.
> >
> > There's only one clock controller on-board and it's custom for HiP04?
> >
> 
> Since all those PLL settings are configured in bootloader, kernel
> don't need to configure it again.
> 
> By the way, I don't have the manual to configure those PLLs. All the clocks
> are defined as fixed in kernel side.

Given that, per Arnd's suggestion these should probably just be
fixed-clock nodes, and we don't need the driver at all until we know how
to handle these PLLs and their parents.

> >> +
> >> +- reg: physical base address of the controller and length of memory mapped
> >> +  region.
> >> +
> >> +- #clock-cells: should be 1.
> >> +
> >> +
> >> +Each clock is assigned an identifier and client nodes use this identifier
> >> +to specify the clock which they consume.
> >> +
> >> +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>.
> >
> > This must come in the same patch.
> >
> > Mark.
> 
> HiP04 clock driver is already merged into mainline.

I see. This was not obvious from the commit message.

Mark.