[PATCH v4 00/10] Add SDHCI support for ST Microelectronics SoCs

[Maxime Coquelin]

On 07/10/2014 02:51 PM, Ulf Hansson wrote:
> On 9 July 2014 17:51, Maxime Coquelin <maxime.coquelin at st.com> wrote:
>>
>>
>> On 07/09/2014 05:07 PM, Peter Griffin wrote:
>>>
>>> This series adds a SDHCI platform driver for ST SoCs, along with
>>> the additional device tree bindings and configuration to enable
>>> the controller to work properly.
>>>
>>> Initially it supports the stih416 and stih415 SoCs, and has
>>> been tested on a stih416-b2020 board.
>>>
>>> regards,
>>>
>>> Peter.
>>>
>>> Changes since v1
>>> - Whitespace cleanups
>>> - Use readl_relaxed io accessor
>>> - Add update to MAINTAINERS
>>> - Remove reset controller code from platform driver
>>> - Remove #ifdef around sleep ops
>>> - Use sdhci_pltfm_clk_get_max_clock lib function
>>> - Pass bus-width etc through board device tree node
>>> - Remove unncessary header
>>> - Remove / change some debug messages
>>> - Remove final break from switch case
>>>
>>> Changes since v2
>>> - Update CC list with alkml and lkml lists
>>>
>>> Changes since v3
>>> - Rebased on v3.16-rc4
>>> - Use sdhci_set_bus_width lib function for set_bus_width
>>> - Remove sdhci_st_8bit_width function
>>> - Use sdhci_set_clock lib function for set_clock
>>>
>>> Peter Griffin (10):
>>>     mmc: sdhci-st: Intial support for ST SDHCI controller
>>>     mmc: sdhci-st: ST Microelectronics SDHCI binding documentation.
>>>     ARM: STi: DT: Add sdhci pins for stih416
>>>     ARM: STi: DT: Add sdhci controller for stih416
>>>     ARM: STi: DT: Add sdhci pin configuration for stih415
>>>     ARM: STi: DT: Add sdhci controller for stih415
>>>     ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs
>>>     ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards.
>>>     ARM: update multi_v7_defconfig for STI
>>>     MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
>>>
>>>    Documentation/devicetree/bindings/mmc/sdhci-st.txt |  33 ++++
>>>    MAINTAINERS                                        |   1 +
>>>    arch/arm/boot/dts/stih415-pinctrl.dtsi             |  21 +++
>>>    arch/arm/boot/dts/stih415.dtsi                     |  12 ++
>>>    arch/arm/boot/dts/stih416-b2020.dts                |   8 +
>>>    arch/arm/boot/dts/stih416-b2020e.dts               |   6 +
>>>    arch/arm/boot/dts/stih416-pinctrl.dtsi             |  39 +++++
>>>    arch/arm/boot/dts/stih416.dtsi                     |  24 +++
>>>    arch/arm/boot/dts/stih41x-b2020.dtsi               |   4 +
>>>    arch/arm/boot/dts/stih41x-b2020x.dtsi              |   4 +
>>>    arch/arm/configs/multi_v7_defconfig                |   1 +
>>>    drivers/mmc/host/Kconfig                           |  12 ++
>>>    drivers/mmc/host/Makefile                          |   1 +
>>>    drivers/mmc/host/sdhci-st.c                        | 176
>>> +++++++++++++++++++++
>>>    14 files changed, 342 insertions(+)
>>>    create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-st.txt
>>>    create mode 100644 drivers/mmc/host/sdhci-st.c
>>>
>>
>> Thanks Peter.
>>
>> DT patches queued to git://git.stlinux.com/devel/kernel/linux-sti.git
>> sti-dt-for-v3.17-1
>
> What about patch9 and 10? Did you take them as well?
>
> You may add my ack for them, for whatever it's worth.

Yes I will take them too.

Regards,
Maxime

>
> Kind regards
> Uffe
>
>>
>> Regards,
>> Maxime