[PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards

[Bo Shen]

Hi Boris,

On 07/10/2014 12:34 AM, Boris BREZILLON wrote:
> Hello Bo,
>
> I know you're quite busy, but if you have some time could you test this
> series on both CPU Modules (Embest and Ronetix): I only own the Embest
> one.
>
> Best Regards,
>
> Boris
>
> On Thu, 26 Jun 2014 12:13:33 +0200
> Boris BREZILLON <boris.brezillon at free-electrons.com> wrote:
>
>> Hello,
>>
>> This patch removes a board specific hook for sama5d3xek boards from the
>> sama5d3 generic DT board file.
>>
>> This hook (which register a phy fixup configuring board specific delays
>> in the ksz9021 ethernet phy) is now replaced by the appropriate DT
>> properties definitions in the sama5d3xcm.dtsi file.
>>
>> Best Regards,
>>
>> Boris
>>
>> Changes since v1:
>>   - fix txc-skew-ps and rxc-skew-ps delays
>>   - remove phy address info to handle Ronetix and Embest HW designs
>>
>> Boris BREZILLON (2):
>>    ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek
>>      boards
>>    ARM: at91: remove phy fixup for sama5d3xek boards
>>
>>   arch/arm/boot/dts/sama5d3xcm.dtsi   | 15 +++++++++++++++
>>   arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
>>   2 files changed, 15 insertions(+), 22 deletions(-)
>>

For this series, test OK on sama5d33ek (Ronetix) and sama5d34ek (Embest).

Tested-by: Bo Shen <voice.shen at atmel.com>

Best Regards,
Bo Shen