[PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards

[Boris BREZILLON]

Hello Bo,

I know you're quite busy, but if you have some time could you test this
series on both CPU Modules (Embest and Ronetix): I only own the Embest
one.

Best Regards,

Boris

On Thu, 26 Jun 2014 12:13:33 +0200
Boris BREZILLON <boris.brezillon at free-electrons.com> wrote:

> Hello,
> 
> This patch removes a board specific hook for sama5d3xek boards from the
> sama5d3 generic DT board file.
> 
> This hook (which register a phy fixup configuring board specific delays
> in the ksz9021 ethernet phy) is now replaced by the appropriate DT
> properties definitions in the sama5d3xcm.dtsi file.
> 
> Best Regards,
> 
> Boris
> 
> Changes since v1:
>  - fix txc-skew-ps and rxc-skew-ps delays
>  - remove phy address info to handle Ronetix and Embest HW designs
> 
> Boris BREZILLON (2):
>   ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek
>     boards
>   ARM: at91: remove phy fixup for sama5d3xek boards
> 
>  arch/arm/boot/dts/sama5d3xcm.dtsi   | 15 +++++++++++++++
>  arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
>  2 files changed, 15 insertions(+), 22 deletions(-)
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com