[PATCH] ARM: OMAP2+: l2c: squelch warning dump on power control setting

[Sekhar Nori]

On Monday 07 July 2014 08:40 PM, Felipe Balbi wrote:
> Hi,
> 
> On Mon, Jul 07, 2014 at 02:40:08PM +0100, Russell King - ARM Linux wrote:
>> On Mon, Jul 07, 2014 at 05:39:26AM -0700, Tony Lindgren wrote:
>>> * Russell King - ARM Linux <linux at arm.linux.org.uk> [140707 05:17]:
>>>> On Mon, Jul 07, 2014 at 05:20:27PM +0530, Sekhar Nori wrote:
>>>>> OMAP4430 had L2 cache controller version r2p0 (per the public TRM) which
>>>>> does not have this register. So unless there is a ROM API that was
>>>>> introduced after OMAP4430, this would not be there even for other
>>>>> OMAP4s. Public TRM of OMAP4470 does not indicate an API for this.
>>>>>
>>>>> Before creating the patch, I checked with ROM team handling AM437x and
>>>>> they denied an API to write to this register was present in AM437x ROM.
>>>>
>>>> Okay, so why are we trying to write to this register then...
>>>>
>>>> Ah, we have a bug in cache-l2x0.c:
>>>>
>>>> #define L2X0_CACHE_ID_PART_MASK         (0xf << 6)
>>>> #define L2X0_CACHE_ID_RTL_MASK          0x3f
>>>> #define L310_CACHE_ID_RTL_R3P0          0x05
>>>>
>>>>         unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
>>>>
>>>>         if (rev >= L310_CACHE_ID_RTL_R2P0) {
>>>> ...
>>>>         if (rev >= L310_CACHE_ID_RTL_R3P0) {
>>>>                 l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN,
>>>>                               base, L310_POWER_CTRL);
>>>>
>>>> So, because we're masking the wrong bits, we end up with these tests
>>>> always succeeding.
>>>>
>>>> So that's a NACK for the original patch, it's the wrong fix.  The
>>>> right fix is to avoid writing this register by fixing the RTL masking.
>>>
>>> Okie dokie, dropping the omap specific fix.
>>
>> Here's the revision mask fix - with the existing code, the revision checks
>> are all useless since they would all pass irrespective of the actual
>> revision.  (Had the L2C series been better tested rather than being largely
>> ignored, this may have been noticed before it was merged...)  Anyway, what
>> isn't clear from Sekhar's message is which revision L2C310 is in the AM437x.
>>
>> From: Russell King <rmk+kernel at arm.linux.org.uk>
>> Cc: linux-arm-kernel at lists.infradead.org
>> Subject: [PATCH] ARM: l2c: fix revision checking
>>
>> The revision checking in l2c310_enable() was not correct; we were
>> masking the part number rather than the revision number.  Fix this
>> to use the correct macro.
>>
>> Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP")
>> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
>> ---
>>  arch/arm/mm/cache-l2x0.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
>> index 948f12cf6180..0b5068256baf 100644
>> --- a/arch/arm/mm/cache-l2x0.c
>> +++ b/arch/arm/mm/cache-l2x0.c
>> @@ -732,7 +732,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v
>>  
>>  static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
>>  {
>> -	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
>> +	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
>>  	bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9;
> 
> even with this change, l2c still tries to write to power control
> register, at least on AM437x. Looking a little deeper here, AM437x
> identifies itself as l2c PL310 r3p3, which should have power control
> register, but aparentely there's no way to write that register. I'll
> file a bug to our ROM team, but we will certainly need a way to
> workaround this inside omap4-common.c

Looks like we need both my patch as well as Russell's patch. I can
respin my patch with the pr_info_once() dropped if it helps further
reduce boot noise.

Thanks,
Sekhar