[PATCH 3.19-rc1 v14 6/8] arm: netx: Migrate DEBUG_LL macros to shared directory

[Daniel Thompson]

As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT
which default to UART1 but allow a user to configure UART2 or UART3.
We also introduce symbolic names for the registers and flags.

Signed-off-by: Daniel Thompson <daniel.thompson at linaro.org>
Cc: Russell King <linux at arm.linux.org.uk>
Acked-by: Arnd Bergmann <arnd.bergmann at linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/Kconfig.debug                             | 16 ++++++++++++++--
 .../mach/debug-macro.S => include/debug/netx.S}    | 22 +++++++++++-----------
 2 files changed, 25 insertions(+), 13 deletions(-)
 rename arch/arm/{mach-netx/include/mach/debug-macro.S => include/debug/netx.S} (62%)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ec25d746b4dd..ff43ea38fe1f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -503,6 +503,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Vybrid based platforms.
 
+	config DEBUG_NETX_UART
+		bool "Kernel low-level debugging messages via NetX UART"
+		depends on ARCH_NETX
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Hilscher NetX based platforms.
+
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
@@ -1231,6 +1238,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6SX_UART
 	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+	default "debug/netx.S" if DEBUG_NETX_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
@@ -1276,6 +1284,7 @@ config DEBUG_UART_BCM63XX
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
+	default 0x00100a00 if DEBUG_NETX_UART
 	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
@@ -1364,7 +1373,8 @@ config DEBUG_UART_PHYS
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+		DEBUG_MSM_UART || DEBUG_NETX_UART || \
+		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
@@ -1373,6 +1383,7 @@ config DEBUG_UART_PHYS
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
+	default 0xe0000a00 if DEBUG_NETX_UART
 	default 0xe0010fe0 if ARCH_RPC
 	default 0xe1000000 if DEBUG_MSM_UART
 	default 0xf0000be0 if ARCH_EBSA110
@@ -1449,7 +1460,8 @@ config DEBUG_UART_VIRT
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_MSM_UART || DEBUG_NETX_UART || \
+		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
 
 config DEBUG_UART_8250_SHIFT
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/include/debug/netx.S
similarity index 62%
rename from arch/arm/mach-netx/include/mach/debug-macro.S
rename to arch/arm/include/debug/netx.S
index 247781e096e2..81e1b2af70f7 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/netx.S
@@ -1,5 +1,4 @@
-/* arch/arm/mach-netx/include/mach/debug-macro.S
- *
+/*
  * Debugging macro include header
  *
  *  Copyright (C) 1994-1999 Russell King
@@ -11,26 +10,27 @@
  *
 */
 
-#include "hardware.h"
+#define UART_DATA 0
+#define UART_FLAG 0x18
+#define UART_FLAG_BUSY (1 << 3)
 
 		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00000a00
-		orr	\rv, \rp, #io_p2v(0x00100000)	@ virtual
-		orr	\rp, \rp, #0x00100000		@ physical
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
 		.endm
 
 		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
+		str	\rd, [\rx, #UART_DATA]
 		.endm
 
 		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
+1002:		ldr	\rd, [\rx, #UART_FLAG]
+		tst	\rd, #UART_FLAG_BUSY
 		bne	1002b
 		.endm
 
 		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
+1001:		ldr	\rd, [\rx, #UART_FLAG]
+		tst	\rd, #UART_FLAG_BUSY
 		bne	1001b
 		.endm
-- 
1.9.3