[PATCH v4 00/11] mtd: nand: Support for new DT NAND driver
Lee Jones
lee.jones at linaro.org
Tue Dec 9 06:54:50 PST 2014
On Wed, 05 Nov 2014, Lee Jones wrote:
> Hi Brian,
>
> I believe all of your queries have either been answered or addressed
> and I am hoping this will be the last submission [v2]. :)
>
> This is v4 of the squashed submission. v1 had a small typo which
> prevented the BBT code from being truly configurable, v2 had some
> build issues due to a silly 'post testing' fixup mistake and v3
> suffered with some checkpatch errors which have been rectified and
> some unused/utilised code segments which have now been removed.
> I've also fixed some DMA issues which you spotted and provided a
> more suitable ECC tolerance, which has been coupled with a comment
> which describes our reasons for not taking the OOB area into
> consideration during this operation.
>
> Also:
>
> Builds Pass
> Smatch Pass
> Sparse Pass
> Bisectability Pass
> NAND Test Pass
> UBI Tests Pass
> MTD Tests Pass (accept OOB test which is not applicable with
> this controller. I will rectify this in the
> near future though, as it _can be_ useful for
> debugging/testing.)
7 week poke.
> Lee Jones (11):
> ARM: multi-v7: Enable ST BCH NAND
> ARM: sti: Add two new clock definitions for use with ST's NAND
> controllers
> ARM: sti: Add BCH (NAND Flash) Controller support for STiH41x (Orly)
> SoCs
> ARM: sti: Enable BCH NAND for STiH416 B2020-RevE
> mtd: nand: Add new generic NAND Device Tree property
> 'nand-chip-select'
> mtd: nand: WARN() if EEC Bytes per page is larger than the OOB
> mtd: nand: stm_nand_bch: provide Device Tree documentation
> mtd: nand: stm_nand_bch: add shared register defines for ST's NAND
> Controller drivers
> mtd: nand: stm_nand_bch: adding BBT header
> mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller
> mtd: nand: stm_nand_bch: provide ST's implementation of Bad Block
> Table
>
> Documentation/devicetree/bindings/mtd/nand.txt | 3 +
> Documentation/devicetree/bindings/mtd/stm-nand.txt | 74 +
> arch/arm/boot/dts/stih416-b2020e.dts | 8 +
> arch/arm/boot/dts/stih41x-b2020.dtsi | 35 +
> arch/arm/configs/multi_v7_defconfig | 2 +
> drivers/mtd/nand/Kconfig | 15 +
> drivers/mtd/nand/Makefile | 3 +
> drivers/mtd/nand/nand_base.c | 2 +
> drivers/mtd/nand/stm_nand_bbt.c | 619 ++++++++
> drivers/mtd/nand/stm_nand_bch.c | 1645 ++++++++++++++++++++
> drivers/mtd/nand/stm_nand_regs.h | 304 ++++
> include/dt-bindings/clock/stih416-clks.h | 2 +
> include/linux/mtd/stm_nand.h | 131 ++
> include/linux/mtd/stm_nand_bbt.h | 22 +
> 14 files changed, 2865 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/stm-nand.txt
> create mode 100644 drivers/mtd/nand/stm_nand_bbt.c
> create mode 100644 drivers/mtd/nand/stm_nand_bch.c
> create mode 100644 drivers/mtd/nand/stm_nand_regs.h
> create mode 100644 include/linux/mtd/stm_nand.h
> create mode 100644 include/linux/mtd/stm_nand_bbt.h
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list