[PATCH] ARM: dts: am57xx-beagle-x15: Add dual ethernet

[Nishanth Menon]

On 12/04/2014 02:55 PM, Felipe Balbi wrote:
> On Thu, Dec 04, 2014 at 02:53:38PM -0600, Felipe Balbi wrote:
>> Make CPSW work - BeagleBoard-X15 has two network ports
>>
>> MUX_MODE15 means "driver off". Pins are turned off
>> conserving more power.
>>
>> Signed-off-by: Felipe Balbi <balbi at ti.com>
>> Signed-off-by: Nishanth Menon <nm at ti.com>
>> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
>> Signed-off-by: Felipe Balbi <balbi at ti.com>
> 
> grrr, not sure why it signed again... I guess git cherry-pick -s isn't
> very smart after all. Tony, let me know if you prefer that I resend
> fixing this SoB detail. In any case:
> 
> boot logs http://hastebin.com/joxiweleyi
> 
>> ---
>>  arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
>>  1 file changed, 106 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
>> index 49edbda..da1b24c 100644
>> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
>> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
>> @@ -140,6 +140,86 @@
>>  		>;
>>  	};
>>  
>> +	cpsw_pins_default: cpsw_pins_default {
>> +		pinctrl-single,pins = <
>> +			/* Slave 1 */
>> +			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
>> +			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
>> +			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
>> +			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
>> +			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
>> +			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
>> +			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
>> +			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
>> +			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
>> +			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
>> +			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
>> +			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
>> +
>> +			/* Slave 2 */
>> +			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
>> +			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
>> +			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
>> +			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
>> +			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
>> +			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
>> +			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
>> +			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
>> +			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
>> +			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
>> +			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
>> +			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
>> +		>;
>> +
>> +	};
>> +
>> +	cpsw_pins_sleep: cpsw_pins_sleep {
>> +		pinctrl-single,pins = <
>> +			/* Slave 1 */
>> +			0x250 (PIN_INPUT | MUX_MODE15)
>> +			0x254 (PIN_INPUT | MUX_MODE15)
>> +			0x258 (PIN_INPUT | MUX_MODE15)
>> +			0x25c (PIN_INPUT | MUX_MODE15)
>> +			0x260 (PIN_INPUT | MUX_MODE15)
>> +			0x264 (PIN_INPUT | MUX_MODE15)
>> +			0x268 (PIN_INPUT | MUX_MODE15)
>> +			0x26c (PIN_INPUT | MUX_MODE15)
>> +			0x270 (PIN_INPUT | MUX_MODE15)
>> +			0x274 (PIN_INPUT | MUX_MODE15)
>> +			0x278 (PIN_INPUT | MUX_MODE15)
>> +			0x27c (PIN_INPUT | MUX_MODE15)
>> +
>> +			/* Slave 1 */

Slave 2?

>> +			0x198 (PIN_INPUT | MUX_MODE15)
>> +			0x19c (PIN_INPUT | MUX_MODE15)
>> +			0x1a0 (PIN_INPUT | MUX_MODE15)
>> +			0x1a4 (PIN_INPUT | MUX_MODE15)
>> +			0x1a8 (PIN_INPUT | MUX_MODE15)
>> +			0x1ac (PIN_INPUT | MUX_MODE15)
>> +			0x1b0 (PIN_INPUT | MUX_MODE15)
>> +			0x1b4 (PIN_INPUT | MUX_MODE15)
>> +			0x1b8 (PIN_INPUT | MUX_MODE15)
>> +			0x1bc (PIN_INPUT | MUX_MODE15)
>> +			0x1c0 (PIN_INPUT | MUX_MODE15)
>> +			0x1c4 (PIN_INPUT | MUX_MODE15)
>> +		>;
>> +	};
>> +
>> +	davinci_mdio_pins_default: davinci_mdio_pins_default {
>> +		pinctrl-single,pins = <
>> +			/* MDIO */
>> +			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
>> +			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
>> +		>;
>> +	};
>> +
>> +	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
>> +		pinctrl-single,pins = <
>> +			0x23c (PIN_INPUT | MUX_MODE15)
>> +			0x240 (PIN_INPUT | MUX_MODE15)
>> +		>;
>> +	};
>> +
>>  	tps659038_pins_default: tps659038_pins_default {
>>  		pinctrl-single,pins = <
>>  			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
>> @@ -365,6 +445,32 @@
>>  	pinctrl-0 = <&uart3_pins_default>;
>>  };
>>  
>> +&mac {
>> +	status = "okay";
>> +	pinctrl-names = "default", "sleep";
>> +	pinctrl-0 = <&cpsw_pins_default>;
>> +	pinctrl-1 = <&cpsw_pins_sleep>;
>> +	dual_emac;
>> +};
>> +
>> +&cpsw_emac0 {
>> +	phy_id = <&davinci_mdio>, <1>;
>> +	phy-mode = "rgmii";
>> +	dual_emac_res_vlan = <1>;
>> +};
>> +
>> +&cpsw_emac1 {
>> +	phy_id = <&davinci_mdio>, <2>;
>> +	phy-mode = "rgmii";
>> +	dual_emac_res_vlan = <2>;
>> +};
>> +
>> +&davinci_mdio {
>> +	pinctrl-names = "default", "sleep";
>> +	pinctrl-0 = <&davinci_mdio_pins_default>;
>> +	pinctrl-1 = <&davinci_mdio_pins_sleep>;
>> +};
>> +
>>  &mmc1 {
>>  	status = "okay";
>>  
>> -- 
>> 2.1.0.GIT
>>
> 


-- 
Regards,
Nishanth Menon