[PATCH] ARM: dts: am57xx-beagle-x15: Add dual ethernet

[Felipe Balbi]

On Thu, Dec 04, 2014 at 02:53:38PM -0600, Felipe Balbi wrote:
> Make CPSW work - BeagleBoard-X15 has two network ports
> 
> MUX_MODE15 means "driver off". Pins are turned off
> conserving more power.
> 
> Signed-off-by: Felipe Balbi <balbi at ti.com>
> Signed-off-by: Nishanth Menon <nm at ti.com>
> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
> Signed-off-by: Felipe Balbi <balbi at ti.com>

grrr, not sure why it signed again... I guess git cherry-pick -s isn't
very smart after all. Tony, let me know if you prefer that I resend
fixing this SoB detail. In any case:

boot logs http://hastebin.com/joxiweleyi

> ---
>  arch/arm/boot/dts/am57xx-beagle-x15.dts | 106 ++++++++++++++++++++++++++++++++
>  1 file changed, 106 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda..da1b24c 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -140,6 +140,86 @@
>  		>;
>  	};
>  
> +	cpsw_pins_default: cpsw_pins_default {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
> +			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
> +			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
> +			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
> +			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
> +			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
> +			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
> +			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
> +			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
> +			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
> +			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
> +			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
> +
> +			/* Slave 2 */
> +			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
> +			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
> +			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
> +			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
> +			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
> +			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
> +			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
> +			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
> +			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
> +			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
> +			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
> +			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
> +		>;
> +
> +	};
> +
> +	cpsw_pins_sleep: cpsw_pins_sleep {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x250 (PIN_INPUT | MUX_MODE15)
> +			0x254 (PIN_INPUT | MUX_MODE15)
> +			0x258 (PIN_INPUT | MUX_MODE15)
> +			0x25c (PIN_INPUT | MUX_MODE15)
> +			0x260 (PIN_INPUT | MUX_MODE15)
> +			0x264 (PIN_INPUT | MUX_MODE15)
> +			0x268 (PIN_INPUT | MUX_MODE15)
> +			0x26c (PIN_INPUT | MUX_MODE15)
> +			0x270 (PIN_INPUT | MUX_MODE15)
> +			0x274 (PIN_INPUT | MUX_MODE15)
> +			0x278 (PIN_INPUT | MUX_MODE15)
> +			0x27c (PIN_INPUT | MUX_MODE15)
> +
> +			/* Slave 1 */
> +			0x198 (PIN_INPUT | MUX_MODE15)
> +			0x19c (PIN_INPUT | MUX_MODE15)
> +			0x1a0 (PIN_INPUT | MUX_MODE15)
> +			0x1a4 (PIN_INPUT | MUX_MODE15)
> +			0x1a8 (PIN_INPUT | MUX_MODE15)
> +			0x1ac (PIN_INPUT | MUX_MODE15)
> +			0x1b0 (PIN_INPUT | MUX_MODE15)
> +			0x1b4 (PIN_INPUT | MUX_MODE15)
> +			0x1b8 (PIN_INPUT | MUX_MODE15)
> +			0x1bc (PIN_INPUT | MUX_MODE15)
> +			0x1c0 (PIN_INPUT | MUX_MODE15)
> +			0x1c4 (PIN_INPUT | MUX_MODE15)
> +		>;
> +	};
> +
> +	davinci_mdio_pins_default: davinci_mdio_pins_default {
> +		pinctrl-single,pins = <
> +			/* MDIO */
> +			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
> +			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
> +		>;
> +	};
> +
> +	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
> +		pinctrl-single,pins = <
> +			0x23c (PIN_INPUT | MUX_MODE15)
> +			0x240 (PIN_INPUT | MUX_MODE15)
> +		>;
> +	};
> +
>  	tps659038_pins_default: tps659038_pins_default {
>  		pinctrl-single,pins = <
>  			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
> @@ -365,6 +445,32 @@
>  	pinctrl-0 = <&uart3_pins_default>;
>  };
>  
> +&mac {
> +	status = "okay";
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&cpsw_pins_default>;
> +	pinctrl-1 = <&cpsw_pins_sleep>;
> +	dual_emac;
> +};
> +
> +&cpsw_emac0 {
> +	phy_id = <&davinci_mdio>, <1>;
> +	phy-mode = "rgmii";
> +	dual_emac_res_vlan = <1>;
> +};
> +
> +&cpsw_emac1 {
> +	phy_id = <&davinci_mdio>, <2>;
> +	phy-mode = "rgmii";
> +	dual_emac_res_vlan = <2>;
> +};
> +
> +&davinci_mdio {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&davinci_mdio_pins_default>;
> +	pinctrl-1 = <&davinci_mdio_pins_sleep>;
> +};
> +
>  &mmc1 {
>  	status = "okay";
>  
> -- 
> 2.1.0.GIT
> 

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141204/3e8353b1/attachment.sig>