[PATCH v3 2/4] ARM: DT: APQ8064: Add node for ps_hold function in pinctrl

[Pramod Gurav]

This patch adds DT support to configure GPIO_78 as function ps_hold
on apq8064.

CC: Rob Herring <robh+dt at kernel.org>
CC: Pawel Moll <pawel.moll at arm.com>
CC: Mark Rutland <mark.rutland at arm.com>
CC: Ian Campbell <ijc+devicetree at hellion.org.uk>
CC: Kumar Gala <galak at codeaurora.org>
CC: devicetree at vger.kernel.org
CC: linux-arm-kernel at lists.infradead.org

Signed-off-by: Pramod Gurav <pramod.gurav at smartplayin.com>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index e23303e..35c1907 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -82,6 +82,16 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ps_hold>;
+
+			ps_hold: ps_hold {
+				mux {
+					pins = "gpio78";
+					function = "ps_hold";
+				};
+			};
 		};
 
 		intc: interrupt-controller at 2000000 {
-- 
1.7.0.4