[PATCH v3 1/4] ARM: DT: APQ8064: Add pinctrl support

[Pramod Gurav]

This patch adds device tree nodes to support pinctrl for apq8064 SOC

CC: Rob Herring <robh+dt at kernel.org>
CC: Pawel Moll <pawel.moll at arm.com>
CC: Mark Rutland <mark.rutland at arm.com>
CC: Ian Campbell <ijc+devicetree at hellion.org.uk>
CC: Kumar Gala <galak at codeaurora.org>
CC: devicetree at vger.kernel.org
CC: linux-arm-kernel at lists.infradead.org

Signed-off-by: Pramod Gurav <pramod.gurav at smartplayin.com>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index d66fb25..e23303e 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -73,6 +73,17 @@
 		ranges;
 		compatible = "simple-bus";
 
+		tlmm_pinmux: pinctrl at 800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		intc: interrupt-controller at 2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
-- 
1.7.0.4