[PATCH 0/3] virtio: Clean up scatterlists and use the DMA API

[Christopher Covington]

On 08/27/2014 01:37 PM, Andy Lutomirski wrote:
> On Wed, Aug 27, 2014 at 10:34 AM, Christopher Covington
> <cov at codeaurora.org> wrote:
>> On 08/27/2014 12:19 PM, Andy Lutomirski wrote:
>>> On Wed, Aug 27, 2014 at 9:13 AM, Christopher Covington
>>> <cov at codeaurora.org> wrote:
>>
>> Virtme looks interesting. If it's any use, here is my modest QEMU command line
>> collection.
>>
>> $dir/bin/x86_64-linux-gnu/qemu-system-x86_64 \
>>   -m 1024 \
>>   -kernel $dir/boot/x86_64-linux-gnu/bzImage-x86_64 \
>>   -append 'root=/dev/root init=/sbin/x86_64-linux-gnu/init rootfstype=9p
>> rootflags=trans=virtio,version=9p2000.L ro console=ttyS0' \
>>   -serial stdio \
>>   -fsdev local,id=root,path=$dir,security_model=none \
>>   -device virtio-9p-pci,fsdev=root,mount_tag=/dev/root \
>>   -monitor none
> 
> This is similar to what virtme does, except that virtme will give you
> a much more functional system at the cost of a small fraction of a
> second of additional boot time.  And virtme sometimes supports modules
> :)
> 
>>
>> $dir/bin/x86_64-linux-gnu/qemu-system-arm \
>>   -M virt \
>>   -cpu cortex-a15 \
>>   -m 1024 \
>>   -kernel $dir/boot/arm-linux-gnueabihf/Image \
>>   -append 'root=/dev/root init=/sbin/arm-linux-gnueabihf/init rootfstype=9p
>> rootflags=trans=virtio,version=9p2000.L ro console=ttyAMA0' \
>>   -serial stdio \
>>   -fsdev local,id=root,path=$dir,security_model=none \
>>   -device virtio-9p-device,fsdev=root,mount_tag=/dev/root \
>>   -monitor none
> 
> Can you give me some hints as to how to configure a kernel for this?
> I tried to get anything other than versatilepb working and gave up.

I think you can just use vexpress_defconfig. If you want to from there you can
unselect CONFIG_ARCH_VEXPRESS and set CONFIG_ARCH_VIRT=y, but I don't think
that's strictly necessary.

>> $dir/bin/x86_64-linux-gnu/qemu-system-aarch64 \
>>   -M virt \
>>   -cpu cortex-a57 \
>>   -m 1024 \
>>   -kernel $dir/boot/aarch64-linux-gnu/Image \
>>   -append 'root=/dev/root init=/sbin/aarch64-linux-gnu/init rootfstype=9p
>> rootflags=trans=virtio,version=9p2000.L ro console=ttyAMA0' \
>>   -serial stdio \
>>   -fsdev local,id=root,path=$dir,security_model=none \
>>   -device virtio-9p-device,fsdev=root,mount_tag=/dev/root -monitor none
>>
> 
> Ooh, thanks!  I'll add support for this to virtme.

Cheers,
Christopher

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by the Linux Foundation.