[PATCH v3 09/10] mfd: pm8x41: document device tree bindings

Josh Cartwright joshc at codeaurora.org
Tue Oct 29 11:05:46 EDT 2013


On Tue, Oct 29, 2013 at 04:18:35PM +0200, Ivan T. Ivanov wrote:
> On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote: 
> > Document the bindings used to describe the Qualcomm 8x41 PMICs.
> > 
> > Signed-off-by: Josh Cartwright <joshc at codeaurora.org>
> > ---
> >  Documentation/devicetree/bindings/mfd/pm8x41.txt | 33 ++++++++++++++++++++++++
> >  1 file changed, 33 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/pm8x41.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/pm8x41.txt b/Documentation/devicetree/bindings/mfd/pm8x41.txt
> > new file mode 100644
> > index 0000000..6afd4ce
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/pm8x41.txt
> > @@ -0,0 +1,33 @@
> > +Qualcomm PM8841 and PM8941 PMIC multi-function devices
> > +
> > +The PM8x41 PMICs are used with the Qualcomm Snapdragon 800 series SoCs, and are
> > +interfaced to the chip via the SPMI (System Power Management Interface) bus.
> > +Support for  multiple independent functions are implemented by splitting the
> > +16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> > +each.  A function can consume one or more of these fixed-size register regions.
> > +
> > +Required properties:
> > +- compatible: Must be one of:
> > +     "qcom,pm8841"
> > +     "qcom,pm8941"
> > +- reg: Specifies the SPMI USID slave address for this device
> > +- #address-cells = <1>
> > +- #size-cells = <0>
> > +
> > +Each child node represents a function of the PM8x41.  Each child 'reg' entry
> > +describes an offset within the USID slave address where the region starts.
> > +
> > +Example:
> > +
> > +pm8941 at 0 {
> > +	compatible = "qcom,pm8941";
> > +	reg = <0x0>;
> > +
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +
> > +	rtc {
> > +		compatible = "qcom,pm8941-rtc";
> > +		reg = <0x6000 0x6100>;
> 
> This doesn't look right. Probably #size-cells have to be <1>?

Some functions of the PMIC actually consume more than one fixed-size
region of the slave address space.  This example is showing one such
peripheral (consuming the region starting at 0x6000 and another at
0x6100).

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation



More information about the linux-arm-kernel mailing list