[PATCH v3 09/10] mfd: pm8x41: document device tree bindings

[Ivan T. Ivanov]

Hi Josh,

On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote: 
> Document the bindings used to describe the Qualcomm 8x41 PMICs.
> 
> Signed-off-by: Josh Cartwright <joshc at codeaurora.org>
> ---
>  Documentation/devicetree/bindings/mfd/pm8x41.txt | 33 ++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/pm8x41.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/pm8x41.txt b/Documentation/devicetree/bindings/mfd/pm8x41.txt
> new file mode 100644
> index 0000000..6afd4ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/pm8x41.txt
> @@ -0,0 +1,33 @@
> +Qualcomm PM8841 and PM8941 PMIC multi-function devices
> +
> +The PM8x41 PMICs are used with the Qualcomm Snapdragon 800 series SoCs, and are
> +interfaced to the chip via the SPMI (System Power Management Interface) bus.
> +Support for  multiple independent functions are implemented by splitting the
> +16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> +each.  A function can consume one or more of these fixed-size register regions.
> +
> +Required properties:
> +- compatible: Must be one of:
> +     "qcom,pm8841"
> +     "qcom,pm8941"
> +- reg: Specifies the SPMI USID slave address for this device
> +- #address-cells = <1>
> +- #size-cells = <0>
> +
> +Each child node represents a function of the PM8x41.  Each child 'reg' entry
> +describes an offset within the USID slave address where the region starts.
> +
> +Example:
> +
> +pm8941 at 0 {
> +	compatible = "qcom,pm8941";
> +	reg = <0x0>;
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	rtc {
> +		compatible = "qcom,pm8941-rtc";
> +		reg = <0x6000 0x6100>;

This doesn't look right. Probably #size-cells have to be <1>?

Regards,
Ivan


> +	};
> +}