[PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation

[Nicolas Ferre]

On 04/10/2013 10:50, Nicolas Ferre :
> On 04/10/2013 10:46, ludovic.desroches at atmel.com :
>> From: Ludovic Desroches <ludovic.desroches at atmel.com>
>>
>> The value to set ASAP mode for FIFO configuration is 2 instead of 1.
>>
>> Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
>
> Yes, sure: thanks for having corrected it!
>
> Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

Vinod, ping?

>
>> ---
>>    Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +-
>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
>> index c280a0e..434f74e 100644
>> --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
>> +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
>> @@ -28,7 +28,7 @@ The three cells in order are:
>>    dependant:
>>      - bit 7-0: peripheral identifier for the hardware handshaking interface. The
>>      identifier can be different for tx and rx.
>> -  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
>> +  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
>>
>>    Example:
>>
>>
>
>


-- 
Nicolas Ferre