[PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation

[Nicolas Ferre]

On 04/10/2013 10:46, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches at atmel.com>
>
> The value to set ASAP mode for FIFO configuration is 2 instead of 1.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>

Yes, sure: thanks for having corrected it!

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> ---
>   Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> index c280a0e..434f74e 100644
> --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> @@ -28,7 +28,7 @@ The three cells in order are:
>   dependant:
>     - bit 7-0: peripheral identifier for the hardware handshaking interface. The
>     identifier can be different for tx and rx.
> -  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
> +  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
>
>   Example:
>
>


-- 
Nicolas Ferre