[PATCH 5/8] ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)

[Tony Lindgren]

* Tony Lindgren <tony at atomide.com> [131010 15:29]:
> I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support
> with the pinctrl patches, so it probably works better than the
> board-*.c files ever did. Also the board-omap3evm.c file is broken
> for the DSS, and has been for a while. Patches are welcome to fix
> it in this .dts file, let's just drop the board-*.c file for this.

Oops, the NAND I did not test and the copied partition map is
different from the board file. Here's the updated partition map.
I've tested the NAND using ubifs on the last partition.

I'm folding in the following fix as I did not push it out yet.

Regards,

Tony


--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -94,7 +94,7 @@
 		 <5 0 0x2c000000 0x01000000>;
 
 	nand at 0,0 {
-		linux,mtd-name= "micron,mt29c4g96maz";
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
 		reg = <0 0 0>;
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
@@ -118,24 +118,24 @@
 		#size-cells = <1>;
 
 		partition at 0 {
-			label = "SPL";
-			reg = <0 0x100000>;
+			label = "X-Loader";
+			reg = <0 0x80000>;
 		};
 		partition at 0x80000 {
 			label = "U-Boot";
-			reg = <0x100000 0x180000>;
+			reg = <0x80000 0x1c0000>;
 		};
 		partition at 0x1c0000 {
 			label = "Environment";
-			reg = <0x280000 0x100000>;
+			reg = <0x240000 0x40000>;
 		};
 		partition at 0x280000 {
 			label = "Kernel";
-			reg = <0x380000 0x300000>;
+			reg = <0x280000 0x500000>;
 		};
 		partition at 0x780000 {
 			label = "Filesystem";
-			reg = <0x680000 0x1f980000>;
+			reg = <0x780000 0x1f880000>;
 		};
 	};