[GIT PULL] ARM: OMAP: Device Tree for 3.11
Tony Lindgren
tony at atomide.com
Thu Jun 20 02:45:42 EDT 2013
Arnd & Olof,
* Benoit Cousson <b-cousson at ti.com> [130619 16:10]:
> Hi Tony,
>
> Please pull the following commits for OMAP Device Tree for v3.11.
>
> It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.
>
> Special thanks to Florian for his nice cleanup using the C preprocessor.
It's best that Arnd and Olof take this pull request directly as we're
getting so close to the merge window. These patches should be pretty
much independent of the other branches I've sent, and are needed to
keep omap4 booting now that we've flipped the switch for omap4 to be
DT only.
Regards,
Tony
> The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:
>
> Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts
>
> for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:
>
> ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19 16:59:28 -0500)
>
> ----------------------------------------------------------------
> Afzal Mohammed (2):
> ARM: dts: AM43x: Initial support
> ARM: dts: AM43x EPOS EVM support
>
> Dan Murphy (3):
> ARM: dts: omap4-panda: Update the LED support for the panda
> ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
> ARM: dts: omap5-uevm: Add LED support for uEVM blue LED
>
> Eduardo Valentin (3):
> ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
> ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
> ARM: dts: OMAP5: Add bandgap DT entry
>
> Florian Vaussard (15):
> ARM: dts: OMAP2+: Use #include for all device trees
> ARM: dts: OMAP2+: Use existing constants for GPIOs
> ARM: dts: OMAP4/5: Use existing constants for IRQs
> ARM: dts: OMAP2+: Header file for pinctrl constants
> ARM: dts: OMAP2+: Use pinctrl constants
> ARM: dts: AM3XXX: Use #include for all device trees
> ARM: dts: AM33XX: Use existing constants for GPIOs
> ARM: dts: AM33XX: Specific pinctrl header
> ARM: dts: AM33XX: Use pinctrl constants
> ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
> ARM: dts: Protect pinctrl headers against multiple inclusions
> ARM: dts: OMAP3: Include IRQ header
> ARM: dts: omap3-tobi: Add SMSC911X node
> ARM: dts: omap3-tobi: Correct polarity for GPIO LED
> ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
>
> J Keerthy (1):
> ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
>
> Javier Martinez Canillas (3):
> ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
> ARM: dts: omap3-igep0020: Add NAND flash support
> ARM: dts: omap3-igep0030: Add NAND flash support
>
> Kevin Hilman (3):
> ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
> ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
> ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line
>
> Mugunthan V N (3):
> ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
> ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
> ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
>
> Philip Avinash (4):
> ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
> ARM: dts: AM33XX: Add PWMSS device tree nodes
> ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
> ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk
>
> Philip, Avinash (1):
> ARM: dts: AM33XX: Add ELM node
>
> Roger Quadros (4):
> ARM: dts: omap5-uevm: Add USB Host support
> ARM: dts: omap4-panda: Add USB Host support
> ARM: dts: omap4-panda: Fix DVI EDID reads
> ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
>
> Sourav Poddar (1):
> ARM: dts: omap5-uevm: Add uart pinctrl data
>
> Sricharan R (1):
> ARM: dts: omap5: Make uevm as the official board and deprecate sevm support
>
> Suman Anna (1):
> ARM: dts: OMAP4+: Remove multimedia carveouts
>
> Vaibhav Hiremath (7):
> ARM: dts: AM33XX: Add default pinctrl binding for I2C device
> ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
> ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
> ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
> ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
> ARM: AM33XX: clock: Add debugSS clock nodes
> ARM: AM33XX: clock data: Enable clkout2 as part of init
>
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/boot/dts/Makefile | 8 +-
> arch/arm/boot/dts/am335x-bone.dts | 118 ++++-
> arch/arm/boot/dts/am335x-evm.dts | 264 ++++++++++-
> arch/arm/boot/dts/am335x-evmsk.dts | 184 +++++++-
> arch/arm/boot/dts/am33xx.dtsi | 121 ++++-
> arch/arm/boot/dts/am3517-evm.dts | 2 +-
> arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
> arch/arm/boot/dts/am4372.dtsi | 68 +++
> arch/arm/boot/dts/am43x-epos-evm.dts | 18 +
> arch/arm/boot/dts/omap2.dtsi | 5 +-
> arch/arm/boot/dts/omap2420-h4.dts | 2 +-
> arch/arm/boot/dts/omap2420.dtsi | 2 +-
> arch/arm/boot/dts/omap2430.dtsi | 2 +-
> arch/arm/boot/dts/omap3-beagle-xm.dts | 48 +-
> arch/arm/boot/dts/omap3-beagle.dts | 72 ++-
> arch/arm/boot/dts/omap3-devkit8000.dts | 11 +-
> arch/arm/boot/dts/omap3-evm.dts | 7 +-
> arch/arm/boot/dts/omap3-igep.dtsi | 43 +-
> arch/arm/boot/dts/omap3-igep0020.dts | 111 ++++-
> arch/arm/boot/dts/omap3-igep0030.dts | 60 ++-
> arch/arm/boot/dts/omap3-overo.dtsi | 20 +-
> arch/arm/boot/dts/omap3-tobi.dts | 52 ++-
> arch/arm/boot/dts/omap3.dtsi | 6 +-
> arch/arm/boot/dts/omap3430-sdp.dts | 5 +-
> arch/arm/boot/dts/omap34xx.dtsi | 2 +-
> arch/arm/boot/dts/omap36xx.dtsi | 2 +-
> arch/arm/boot/dts/omap4-panda-a4.dts | 10 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 162 +++++--
> arch/arm/boot/dts/omap4-panda-es.dts | 38 +-
> arch/arm/boot/dts/omap4-panda.dts | 4 +-
> arch/arm/boot/dts/omap4-sdp-es23plus.dts | 8 +-
> arch/arm/boot/dts/omap4-sdp.dts | 126 ++---
> arch/arm/boot/dts/omap4-var-som.dts | 8 +-
> arch/arm/boot/dts/omap4.dtsi | 124 +++--
> arch/arm/boot/dts/omap443x.dtsi | 8 +-
> arch/arm/boot/dts/omap4460.dtsi | 15 +-
> arch/arm/boot/dts/omap5-evm.dts | 261 -----------
> arch/arm/boot/dts/omap5-uevm.dts | 485 ++++++++++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 173 ++++---
> arch/arm/boot/dts/twl4030_omap3.dtsi | 25 +
> arch/arm/mach-omap2/cclock33xx_data.c | 49 +-
> include/dt-bindings/pinctrl/am33xx.h | 42 ++
> include/dt-bindings/pinctrl/omap.h | 55 +++
> 44 files changed, 2172 insertions(+), 659 deletions(-)
> create mode 100644 arch/arm/boot/dts/am4372.dtsi
> create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts
> delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
> create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
> create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi
> create mode 100644 include/dt-bindings/pinctrl/am33xx.h
> create mode 100644 include/dt-bindings/pinctrl/omap.h
More information about the linux-arm-kernel
mailing list