[GIT PULL] ARM: OMAP: Device Tree for 3.11
Benoit Cousson
b-cousson at ti.com
Wed Jun 19 19:04:34 EDT 2013
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.11.
It does contains as well 2 clock data patches, I hope it will not generate any conflict with Paul's tree.
Special thanks to Florian for his nice cleanup using the C preprocessor.
Thanks,
Benoit
The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:
Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts
for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19 16:59:28 -0500)
----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM43x: Initial support
ARM: dts: AM43x EPOS EVM support
Dan Murphy (3):
ARM: dts: omap4-panda: Update the LED support for the panda
ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
ARM: dts: omap5-uevm: Add LED support for uEVM blue LED
Eduardo Valentin (3):
ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
ARM: dts: OMAP5: Add bandgap DT entry
Florian Vaussard (15):
ARM: dts: OMAP2+: Use #include for all device trees
ARM: dts: OMAP2+: Use existing constants for GPIOs
ARM: dts: OMAP4/5: Use existing constants for IRQs
ARM: dts: OMAP2+: Header file for pinctrl constants
ARM: dts: OMAP2+: Use pinctrl constants
ARM: dts: AM3XXX: Use #include for all device trees
ARM: dts: AM33XX: Use existing constants for GPIOs
ARM: dts: AM33XX: Specific pinctrl header
ARM: dts: AM33XX: Use pinctrl constants
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
ARM: dts: Protect pinctrl headers against multiple inclusions
ARM: dts: OMAP3: Include IRQ header
ARM: dts: omap3-tobi: Add SMSC911X node
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
J Keerthy (1):
ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
Javier Martinez Canillas (3):
ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
ARM: dts: omap3-igep0020: Add NAND flash support
ARM: dts: omap3-igep0030: Add NAND flash support
Kevin Hilman (3):
ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line
Mugunthan V N (3):
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
Philip Avinash (4):
ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
ARM: dts: AM33XX: Add PWMSS device tree nodes
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk
Philip, Avinash (1):
ARM: dts: AM33XX: Add ELM node
Roger Quadros (4):
ARM: dts: omap5-uevm: Add USB Host support
ARM: dts: omap4-panda: Add USB Host support
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
Sourav Poddar (1):
ARM: dts: omap5-uevm: Add uart pinctrl data
Sricharan R (1):
ARM: dts: omap5: Make uevm as the official board and deprecate sevm support
Suman Anna (1):
ARM: dts: OMAP4+: Remove multimedia carveouts
Vaibhav Hiremath (7):
ARM: dts: AM33XX: Add default pinctrl binding for I2C device
ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
ARM: AM33XX: clock: Add debugSS clock nodes
ARM: AM33XX: clock data: Enable clkout2 as part of init
.../devicetree/bindings/arm/omap/omap.txt | 3 +
arch/arm/boot/dts/Makefile | 8 +-
arch/arm/boot/dts/am335x-bone.dts | 118 ++++-
arch/arm/boot/dts/am335x-evm.dts | 264 ++++++++++-
arch/arm/boot/dts/am335x-evmsk.dts | 184 +++++++-
arch/arm/boot/dts/am33xx.dtsi | 121 ++++-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
arch/arm/boot/dts/am4372.dtsi | 68 +++
arch/arm/boot/dts/am43x-epos-evm.dts | 18 +
arch/arm/boot/dts/omap2.dtsi | 5 +-
arch/arm/boot/dts/omap2420-h4.dts | 2 +-
arch/arm/boot/dts/omap2420.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 48 +-
arch/arm/boot/dts/omap3-beagle.dts | 72 ++-
arch/arm/boot/dts/omap3-devkit8000.dts | 11 +-
arch/arm/boot/dts/omap3-evm.dts | 7 +-
arch/arm/boot/dts/omap3-igep.dtsi | 43 +-
arch/arm/boot/dts/omap3-igep0020.dts | 111 ++++-
arch/arm/boot/dts/omap3-igep0030.dts | 60 ++-
arch/arm/boot/dts/omap3-overo.dtsi | 20 +-
arch/arm/boot/dts/omap3-tobi.dts | 52 ++-
arch/arm/boot/dts/omap3.dtsi | 6 +-
arch/arm/boot/dts/omap3430-sdp.dts | 5 +-
arch/arm/boot/dts/omap34xx.dtsi | 2 +-
arch/arm/boot/dts/omap36xx.dtsi | 2 +-
arch/arm/boot/dts/omap4-panda-a4.dts | 10 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 162 +++++--
arch/arm/boot/dts/omap4-panda-es.dts | 38 +-
arch/arm/boot/dts/omap4-panda.dts | 4 +-
arch/arm/boot/dts/omap4-sdp-es23plus.dts | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 126 ++---
arch/arm/boot/dts/omap4-var-som.dts | 8 +-
arch/arm/boot/dts/omap4.dtsi | 124 +++--
arch/arm/boot/dts/omap443x.dtsi | 8 +-
arch/arm/boot/dts/omap4460.dtsi | 15 +-
arch/arm/boot/dts/omap5-evm.dts | 261 -----------
arch/arm/boot/dts/omap5-uevm.dts | 485 ++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 173 ++++---
arch/arm/boot/dts/twl4030_omap3.dtsi | 25 +
arch/arm/mach-omap2/cclock33xx_data.c | 49 +-
include/dt-bindings/pinctrl/am33xx.h | 42 ++
include/dt-bindings/pinctrl/omap.h | 55 +++
44 files changed, 2172 insertions(+), 659 deletions(-)
create mode 100644 arch/arm/boot/dts/am4372.dtsi
create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts
delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi
create mode 100644 include/dt-bindings/pinctrl/am33xx.h
create mode 100644 include/dt-bindings/pinctrl/omap.h
More information about the linux-arm-kernel
mailing list