[RFC PATCH 04/11] dma: amba-pl08x: Add support for PL080S variant

[Tomasz Figa]

On Monday 17 of June 2013 15:39:34 Linus Walleij wrote:
> On Sun, Jun 16, 2013 at 10:54 PM, Tomasz Figa <tomasz.figa at gmail.com> 
wrote:
> > PL080S is a modified version of PL080 that can be found on Samsung
> > SoCs, such as S3C6400 and S3C6410.
> > 
> > It has different offset of CONFIG register, separate CONTROL1 register
> > that holds transfer size and larger maximum transfer size.
> > 
> > Signed-off-by: Tomasz Figa <tomasz.figa at gmail.com>
> 
> Acked-by: Linus Walleij <linus.walleij at linaro.org>
> 
> (I would have done some smallish things differently but it
> is only a matter of taste.)
> 
> >  static struct amba_id pl08x_ids[] = {
> > 
> > +       /* Samsung PL080S variant */
> > +       {
> > +               .id     = 0x0a141080,
> > +               .mask   = 0xffffffff,
> > +               .data   = &vendor_pl080s,
> > +       },
> 
> Interesting that Samsung claim to be vendor 0x41
> (ARM).

Yeah, I had identical thought when I saw it first time.

> Well ARM never made revision no 0x0a so
> this works.

Good, this is exactly what I wanted to read! ;)

I was afraid that this ID might conflict with some revision of normal 
PL080, but fortunately it is not the case.

Best refards,
Tomasz