[RFC PATCH 05/11] dma: amba-pl08x: Add support for different maximum transfer size

Tomasz Figa tomasz.figa at gmail.com
Sun Jun 16 16:54:12 EDT 2013


PL080S has separate register to store transfer size in, allowing single
transfer to be much larger than in standard PL080.

This patch makes the amba-pl08x driver aware of this and removes writing
transfer size to reserved bits of CH_CONTROL register on PL080S, which
was not a problem witn transfer sizes fitting the original bitfield
of PL080, but now would overwrite other fields.

Signed-off-by: Tomasz Figa <tomasz.figa at gmail.com>
---
 drivers/dma/amba-pl08x.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index d1f1333..eb10eb8 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -112,6 +112,7 @@ struct vendor_data {
 	u8 config_offset;
 	u8 channels;
 	u32 flags;
+	u32 max_transfer_size;
 };
 
 /*
@@ -843,7 +844,10 @@ static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
 		struct pl08x_lli_build_data *bd,
 		u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
 {
-	*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+	if (pl08x->vd->flags & PL08X_IS_PL080S)
+		*cctl = pl08x_cctl_bits(*cctl, 1, 1, 0);
+	else
+		*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
 	pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl, len);
 	(*total_bytes) += len;
 }
@@ -992,7 +996,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 			 * MIN(buswidths)
 			 */
 			max_bytes_per_lli = bd.srcbus.buswidth *
-				PL080_CONTROL_TRANSFER_SIZE_MASK;
+						pl08x->vd->max_transfer_size;
 			dev_vdbg(&pl08x->adev->dev,
 				"%s max bytes per lli = %zu\n",
 				__func__, max_bytes_per_lli);
@@ -1025,8 +1029,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 					"size 0x%08zx (remainder 0x%08zx)\n",
 					__func__, lli_len, bd.remainder);
 
-				cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
-					bd.dstbus.buswidth, tsize);
+				if (pl08x->vd->flags & PL08X_IS_PL080S)
+					cctl = pl08x_cctl_bits(cctl,
+						bd.srcbus.buswidth,
+						bd.dstbus.buswidth, 0);
+				else
+					cctl = pl08x_cctl_bits(cctl,
+						bd.srcbus.buswidth,
+						bd.dstbus.buswidth, tsize);
 				pl08x_fill_lli_for_desc(&bd, num_llis++,
 						lli_len, cctl, tsize);
 				total_bytes += lli_len;
@@ -2092,24 +2102,28 @@ static struct vendor_data vendor_pl080 = {
 	.channels = 8,
 	.flags = PL08X_IS_DUALMASTER,
 	.config_offset = PL080_CH_CONFIG,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct vendor_data vendor_nomadik = {
 	.channels = 8,
 	.flags = PL08X_IS_DUALMASTER | PL08X_IS_NOMADIK,
 	.config_offset = PL080_CH_CONFIG,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct vendor_data vendor_pl080s = {
 	.channels = 8,
 	.flags = PL08X_IS_DUALMASTER | PL08X_IS_PL080S,
 	.config_offset = PL080S_CH_CONFIG,
+	.max_transfer_size = PL080S_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct vendor_data vendor_pl081 = {
 	.channels = 2,
 	.flags = 0,
 	.config_offset = PL080_CH_CONFIG,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
 };
 
 static struct amba_id pl08x_ids[] = {
-- 
1.8.2.1




More information about the linux-arm-kernel mailing list