[RFC PATCH 25/50] ARM: at91: move pit timer to common clk framework

[Boris BREZILLON]

Use device tree to get the source clock of the PIT (Periodic Interval Timer).
If the clock is not found in device tree (or dt is not enabled) we'll try to
get it using clk_lookup definitions.

Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
---
 arch/arm/mach-at91/at91sam926x_time.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 3a4bc2e..fba7bd6 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -39,6 +39,7 @@
 static u32 pit_cycle;		/* write-once */
 static u32 pit_cnt;		/* access only w/system irq blocked */
 static void __iomem *pit_base_addr __read_mostly;
+static struct clk *mck;
 
 static inline unsigned int pit_read(unsigned int reg_offset)
 {
@@ -186,6 +187,7 @@ static int __init of_at91sam926x_pit_init(void)
 {
 	struct device_node	*np;
 	int			ret;
+	int			err = -EINVAL;
 
 	np = of_find_matching_node(NULL, pit_timer_ids);
 	if (!np)
@@ -195,10 +197,19 @@ static int __init of_at91sam926x_pit_init(void)
 	if (!pit_base_addr)
 		goto node_err;
 
+	mck = of_clk_get(np, 0);
+	if (IS_ERR(mck)) {
+		err = PTR_RET(mck);
+		mck = NULL;
+		pr_crit("AT91: PIT: Unable to get mck clk from DT\n");
+		goto ioremap_err;
+	}
+
 	/* Get the interrupts property */
 	ret = irq_of_parse_and_map(np, 0);
 	if (!ret) {
 		pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
+		clk_put(mck);
 		goto ioremap_err;
 	}
 	at91sam926x_pit_irq.irq = ret;
@@ -212,7 +223,7 @@ ioremap_err:
 node_err:
 	of_node_put(np);
 err:
-	return -EINVAL;
+	return err;
 }
 #else
 static int __init of_at91sam926x_pit_init(void)
@@ -237,7 +248,13 @@ void __init at91sam926x_pit_init(void)
 	 * Use our actual MCK to figure out how many MCK/16 ticks per
 	 * 1/HZ period (instead of a compile-time constant LATCH).
 	 */
-	pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
+	if (!mck)
+		mck = clk_get(NULL, "mck");
+
+	if (IS_ERR(mck))
+		panic("AT91: PIT: Unable to get mck clk\n");
+	pit_rate = clk_get_rate(mck) / 16;
+	pr_notice("AT91: PIT: mck rate = %lu\n", pit_rate);
 	pit_cycle = (pit_rate + HZ/2) / HZ;
 	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
 
-- 
1.7.9.5