Re[2]: [PATCH 4/4] ARM: dts: imx27-phytec-phycore-som: Add initial support for PCM970 RDK

Alexander Shiyan shc_work at mail.ru
Sat Jun 1 04:05:57 EDT 2013


> On Sat, Jun 01, 2013 at 09:54:13AM +0400, Alexander Shiyan wrote:
> > Patch adds initial dts for Phytec PCM970 Rapid development kit.
> > - Added definition for UART0 and UART1.
> > - Added additional SPI chipselect which used on RDK for ZegBee module.
> > 
> > Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
> > ---
> >  arch/arm/boot/dts/Makefile                     |  1 +
> >  arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 29 ++++++++++++++++++++++++++
> >  2 files changed, 30 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 8450c14..eee371f 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
> >  	imx27-apf27dev.dtb \
> >  	imx27-pdk.dtb \
> >  	imx27-phytec-phycore-som.dtb \
> > +	imx27-phytec-phycore-rdk.dtb \
> >  	imx31-bug.dtb \
> >  	imx51-apf51.dtb \
> >  	imx51-apf51dev.dtb \
> > diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
> > new file mode 100644
> > index 0000000..f8a7a49
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
> > @@ -0,0 +1,29 @@
> > +/*
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include "imx27-phytec-phycore-som.dts"
> > +
> > +/ {
> > +	model = "Phytec pcm970";
> > +	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
> > +};
> > +
> > +&cspi1 {
> > +	fsl,spi-num-chipselects = <2>;
> > +	cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
> > +};
> 
> The first chipselect connects to the mc13783 PMIC which is on the
> module, not on the baseboard. Also this is a no-op since the status
> property of the cspi is not changed to 'okay'.
> I suspect you already have a patch adding mc13783 support to the module
> which should be in this series ;)

MC13783 is already here. See my previous patch for this SOM:
http://www.spinics.net/lists/arm-kernel/msg240873.html

---


More information about the linux-arm-kernel mailing list