[PATCH 4/4] ARM: dts: imx27-phytec-phycore-som: Add initial support for PCM970 RDK
Sascha Hauer
s.hauer at pengutronix.de
Sat Jun 1 04:02:32 EDT 2013
On Sat, Jun 01, 2013 at 09:54:13AM +0400, Alexander Shiyan wrote:
> Patch adds initial dts for Phytec PCM970 Rapid development kit.
> - Added definition for UART0 and UART1.
> - Added additional SPI chipselect which used on RDK for ZegBee module.
>
> Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 29 ++++++++++++++++++++++++++
> 2 files changed, 30 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8450c14..eee371f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
> imx27-apf27dev.dtb \
> imx27-pdk.dtb \
> imx27-phytec-phycore-som.dtb \
> + imx27-phytec-phycore-rdk.dtb \
> imx31-bug.dtb \
> imx51-apf51.dtb \
> imx51-apf51dev.dtb \
> diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
> new file mode 100644
> index 0000000..f8a7a49
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
> @@ -0,0 +1,29 @@
> +/*
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include "imx27-phytec-phycore-som.dts"
> +
> +/ {
> + model = "Phytec pcm970";
> + compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
> +};
> +
> +&cspi1 {
> + fsl,spi-num-chipselects = <2>;
> + cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
> +};
The first chipselect connects to the mc13783 PMIC which is on the
module, not on the baseboard. Also this is a no-op since the status
property of the cspi is not changed to 'okay'.
I suspect you already have a patch adding mc13783 support to the module
which should be in this series ;)
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list