[PATCH v2 2/3] serial: mxs: enable the DMA only when the RTS/CTS is valid

[Huang Shijie]

于 2013年07月16日 17:54, Uwe Kleine-König 写道:
> On Tue, Jul 16, 2013 at 02:55:31PM +0800, Huang Shijie wrote:
>> The original DMA support works only when RTS/CTS is enabled.
> What is original here?
>
i will add more information for this in the next version.
>> But after several patches, DMA support has lost this limit.
> This is still misleading.
>
>> This patch adds an optional property for the UART DT node
>> which indicates the UART has RTS and CTS lines.
>>
>> This patch also adds a macro MXS_AUART_RTSCTS, and uses it to check
>> RTS/CTS before we enable the DMA for the UART.
> I still think this should go to stable. The options are:
>
> 	a) also take patch 1 into stable
> 	b) apply this patch without patch 1
>
> I don't know if option a) is OK, b) is probably preferable. And as Greg
to Greg:

I think a) is ok to me. what's your opinion?


> has much to do anyhow, better move this patch first. (Otherwise he will
> probably only say: That patch doesn't apply, please help.)
>
>> Signed-off-by: Huang Shijie<b32955 at freescale.com>
>> ---
>>   .../bindings/tty/serial/fsl-mxs-auart.txt          |    4 ++++
>>   drivers/tty/serial/mxs-auart.c                     |    5 ++++-
>>   2 files changed, 8 insertions(+), 1 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> index 2c00ec6..59a40f1 100644
>> --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> @@ -10,6 +10,10 @@ Required properties:
>>     Refer to dma.txt and fsl-mxs-dma.txt for details.
>>   - dma-names: "rx" for RX channel, "tx" for TX channel.
>>
>> +Optional properties:
>> +- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines,
>> +	it also means you enable the DMA support for this UART.
>> +
>>   Example:
>>   auart0: serial at 8006a000 {
>>   	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
>> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
>> index 465ef0b..27532fd 100644
>> --- a/drivers/tty/serial/mxs-auart.c
>> +++ b/drivers/tty/serial/mxs-auart.c
>> @@ -134,6 +134,7 @@ enum mxs_auart_type {
>>   struct mxs_auart_port {
>>   	struct uart_port port;
>>
>> +#define MXS_AUART_RTSCTS	1
>>   #define MXS_AUART_DMA_ENABLED	0x2
>>   #define MXS_AUART_DMA_TX_SYNC	2  /* bit 2 */
>>   #define MXS_AUART_DMA_RX_READY	3  /* bit 3 */
>> @@ -639,7 +640,7 @@ static void mxs_auart_settermios(struct uart_port *u,
>>   		 * we can only implement the DMA support for auart
>>   		 * in mx28.
>>   		 */
>> -		if (is_imx28_auart(s)) {
>> +		if (is_imx28_auart(s)&&  (s->flags&  MXS_AUART_RTSCTS)) {
> I thought you wanted to add a comment here. Without knowing the details
>
> 	if (RTSCTS)
> 		enable_dma();
>
ok, no problem.


thanks
Huang Shijie