[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

kishon kishon at ti.com
Thu Jan 31 04:30:55 EST 2013


On Thursday 31 January 2013 02:58 PM, Sascha Hauer wrote:
> On Thu, Jan 31, 2013 at 02:42:48PM +0530, kishon wrote:
>> Hi,
>>
>> On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
>>> From: Michael Grzeschik <m.grzeschik at pengutronix.de>
>>>
>>> This adds two little devicetree helper functions for determining the
>>> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
>>> the devicetree.
>>>
>>> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
>>> Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
>>> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>>> ---
>>>   drivers/usb/phy/Makefile |    1 +
>>>   drivers/usb/phy/phy.c    |   10 ++++++++++
>>>   drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>>>   include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>>>   include/linux/usb/otg.h  |    7 +++++++
>>>   include/linux/usb/phy.h  |    9 +++++++++
>>>   6 files changed, 90 insertions(+)
>>>   create mode 100644 include/linux/usb/of.h
>>>
>>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>>> index 9fa6327..e1be1e8 100644
>>> --- a/drivers/usb/phy/Makefile
>>> +++ b/drivers/usb/phy/Makefile
>>> @@ -5,6 +5,7 @@
>>>   ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>>
>>>   obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
>>> +obj-$(CONFIG_OF)			+= of.o
>>
>> You've missed doing "git add ..usb/phy/of.c".
>>
>>>   obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>>>   obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>>>   obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
>>> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
>>> index ef35eb0..3ad4b5c 100644
>>> --- a/drivers/usb/phy/phy.c
>>> +++ b/drivers/usb/phy/phy.c
>>> @@ -1,3 +1,13 @@
>>> +/*
>>> + * phy.c -- USB phy handling
>>> + *
>>> + * Copyright (C) 2004 Texas Instruments
>>
>> it's 2013 already :-P
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>
>> But your *MODULE_LICENSE("GPL")* below tells it's only GPL.
>
> The MODULE_LICENSE("GPL") is in usb-common.c, not in the file I added.

huh.. just noticed. sorry for the noise.

Thanks
Kishon



More information about the linux-arm-kernel mailing list