[PATCH v2] arch/arm/mach-s5pv210: adding ifdef CONFIG_CPU_S5PV210 to fix compiling issue

Kukjin Kim kgene.kim at samsung.com
Thu Jan 17 19:14:27 EST 2013


Chen Gang wrote:
> 
Firstly, thanks for your posting.

But there are some comments.

For subject:
Please see the git log before your commit, it should be helpful to you.
In this case, 'ARM: S5PV210: ...' is used.

> 
>   if not define CONFIG_CPU_S5PV210
> 
>     it will define NULL in common.h for:
>       s5pv210_map_io, s5pv210_init_clocks, s5pv210_init,
s5pv210_init_uarts
> 
>     so need using #ifdef CONFIG_CPU_S5PV210 for them too, in common.c.
>       or compiling issue will occur.
> 
I don't think so, because common.c in mach-s5pv210 should be built with
selecting CONFIG_CPU_S5PV210, actually it depends on CONFIG_ARCH_S5PV210
though.

Any concerns, please let me know.

> 
> Signed-off-by: Chen Gang <gang.chen at asianux.com>
> ---
>  arch/arm/mach-s5pv210/common.c |    9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-
> s5pv210/common.c
> index 9dfe93e..5c88f88 100644
> --- a/arch/arm/mach-s5pv210/common.c
> +++ b/arch/arm/mach-s5pv210/common.c
> @@ -167,6 +167,8 @@ void __init s5pv210_init_io(struct map_desc
> *mach_desc, int size)
>  	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
>  }
> 
> +#ifdef CONFIG_CPU_S5PV210
> +
>  void __init s5pv210_map_io(void)
>  {
>  	/* initialise device information early */
> @@ -209,6 +211,9 @@ void __init s5pv210_init_clocks(int xtal)
>  	s5pv210_setup_clocks();
>  }
> 
> +#endif /* CONFIG_CPU_S5PV210 */
> +
> +

Generally, no need double empty lines here.

>  void __init s5pv210_init_irq(void)
>  {
>  	u32 vic[4];	/* S5PV210 supports 4 VIC */
> @@ -227,6 +232,8 @@ struct bus_type s5pv210_subsys = {
>  	.dev_name	= "s5pv210-core",
>  };
> 
> +#ifdef CONFIG_CPU_S5PV210
> +
>  static struct device s5pv210_dev = {
>  	.bus	= &s5pv210_subsys,
>  };
> @@ -249,3 +256,5 @@ void __init s5pv210_init_uarts(struct s3c2410_uartcfg
> *cfg, int no)
>  {
>  	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
>  }
> +
> +#endif /* CONFIG_CPU_S5PV210 */
> --
> 1.7.10.4

Thanks.

- Kukjin




More information about the linux-arm-kernel mailing list