[PATCH v3 06/18] ARM: clps711x: cdb89712: Special driver for handling memory is removed
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Thu Jan 10 09:09:21 EST 2013
Hello,
I just stumbled over commit 86449336dd3c6e0edf97b971db2daa88917c1d7e
(contained in v3.8-rc1) which is the result of this patch submission. So
it's too late for a review comment, so if you care about my concerns you
need to follow up with a new patch.
On Sat, Nov 17, 2012 at 05:57:12PM +0400, Alexander Shiyan wrote:
> This patch provide migration to using "physmap-flash" and "mtd-ram"
> drivers instead of using special driver for handling memory.
>
> Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
> ---
> arch/arm/mach-clps711x/cdb89712.c | 84 +++++++
> arch/arm/mach-clps711x/include/mach/hardware.h | 3 +
> drivers/mtd/maps/Kconfig | 7 -
> drivers/mtd/maps/Makefile | 1 -
> drivers/mtd/maps/cdb89712.c | 278 ------------------------
> 5 files changed, 87 insertions(+), 286 deletions(-)
> delete mode 100644 drivers/mtd/maps/cdb89712.c
>
> diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
> index 235e625..24f573b 100644
> --- a/arch/arm/mach-clps711x/cdb89712.c
> +++ b/arch/arm/mach-clps711x/cdb89712.c
> @@ -26,6 +26,10 @@
> #include <linux/interrupt.h>
> #include <linux/platform_device.h>
>
> +#include <linux/mtd/physmap.h>
> +#include <linux/mtd/plat-ram.h>
> +#include <linux/mtd/partitions.h>
> +
> #include <mach/hardware.h>
> #include <asm/pgtable.h>
> #include <asm/page.h>
> @@ -44,8 +48,88 @@ static struct resource cdb89712_cs8900_resource[] __initdata = {
> DEFINE_RES_IRQ(CDB89712_CS8900_IRQ),
> };
>
> +static struct mtd_partition cdb89712_flash_partitions[] __initdata = {
> + {
> + .name = "Flash",
> + .offset = 0,
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> +static struct physmap_flash_data cdb89712_flash_pdata __initdata = {
> + .width = 4,
> + .probe_type = "map_rom",
> + .parts = cdb89712_flash_partitions,
> + .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions),
> +};
> +
> +static struct resource cdb89712_flash_resources[] __initdata = {
> + DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M),
> +};
> +
> +static struct platform_device cdb89712_flash_pdev __initdata = {
> + .name = "physmap-flash",
> + .id = 0,
> + .resource = cdb89712_flash_resources,
> + .num_resources = ARRAY_SIZE(cdb89712_flash_resources),
> + .dev = {
> + .platform_data = &cdb89712_flash_pdata,
> + },
> +};
> +
> +static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = {
> + {
> + .name = "BootROM",
> + .offset = 0,
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> +static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = {
> + .width = 4,
> + .probe_type = "map_rom",
> + .parts = cdb89712_bootrom_partitions,
> + .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions),
> +};
> +
> +static struct resource cdb89712_bootrom_resources[] __initdata = {
> + DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM |
> + IORESOURCE_CACHEABLE | IORESOURCE_READONLY),
> +};
> +
> +static struct platform_device cdb89712_bootrom_pdev __initdata = {
> + .name = "physmap-flash",
> + .id = 1,
> + .resource = cdb89712_bootrom_resources,
> + .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources),
> + .dev = {
> + .platform_data = &cdb89712_bootrom_pdata,
> + },
> +};
> +
> +static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = {
> + .bankwidth = 4,
> +};
> +
> +static struct resource cdb89712_sram_resources[] __initdata = {
> + DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE),
> +};
> +
> +static struct platform_device cdb89712_sram_pdev __initdata = {
> + .name = "mtd-ram",
> + .id = 0,
> + .resource = cdb89712_sram_resources,
> + .num_resources = ARRAY_SIZE(cdb89712_sram_resources),
> + .dev = {
> + .platform_data = &cdb89712_sram_pdata,
> + },
> +};
> +
> static void __init cdb89712_init(void)
> {
> + platform_device_register(&cdb89712_flash_pdev);
> + platform_device_register(&cdb89712_bootrom_pdev);
> + platform_device_register(&cdb89712_sram_pdev);
This is broken, all these structs are located in .init.data which is
discarded after the machine is fully booted. Also platformdata must not
live in init data. Consider using platform_device_register_full which
allows more data to be init data.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list