[PATCH 1/5] ARM: Kirkwood: Convert NS2 to gpio-poweroff.

Simon Guinot simon.guinot at sequanux.org
Wed Jan 9 03:41:13 EST 2013


On Fri, Dec 28, 2012 at 03:14:10PM +0100, Andrew Lunn wrote:
> Remove C code and add a Device Tree node in its place.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
> 
> This is untested. I've been known to get the active hi/low the wrong
> way around so that the board powers off as the driver loads at boot
> time. So it would be very good to have a tested-by: sign off.
> 
> 
>  arch/arm/boot/dts/kirkwood-ns2-common.dtsi |    6 ++++++
>  arch/arm/mach-kirkwood/board-ns2.c         |   14 --------------
>  2 files changed, 6 insertions(+), 14 deletions(-)

Tested-by: Simon Guinot <simon.guinot at sequanux.org>

Andrew, do you want me to rebase your patch on the top of the pinctrl
conversion one ?

Simon

> 
> diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> index 9bc6785..58c4103 100644
> --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> @@ -60,4 +60,10 @@
>  			gpios = <&gpio0 12 0>;
>  		};
>  	};
> +
> +	gpio_poweroff {
> +		compatible = "gpio-poweroff";
> +		gpios = <&gpio0 31 0>;
> +	};
> +
>  };
> diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
> index 8821720..f263449 100644
> --- a/arch/arm/mach-kirkwood/board-ns2.c
> +++ b/arch/arm/mach-kirkwood/board-ns2.c
> @@ -15,7 +15,6 @@
>  #include <linux/init.h>
>  #include <linux/platform_device.h>
>  #include <linux/mv643xx_eth.h>
> -#include <linux/gpio.h>
>  #include <linux/of.h>
>  #include "common.h"
>  #include "mpp.h"
> @@ -59,13 +58,6 @@ static unsigned int ns2_mpp_config[] __initdata = {
>  	0
>  };
>  
> -#define NS2_GPIO_POWER_OFF	31
> -
> -static void ns2_power_off(void)
> -{
> -	gpio_set_value(NS2_GPIO_POWER_OFF, 1);
> -}
> -
>  void __init ns2_init(void)
>  {
>  	/*
> @@ -77,10 +69,4 @@ void __init ns2_init(void)
>  	    of_machine_is_compatible("lacie,netspace_mini_v2"))
>  		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
>  	kirkwood_ge00_init(&ns2_ge00_data);
> -
> -	if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
> -	    gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
> -		pm_power_off = ns2_power_off;
> -	else
> -		pr_err("ns2: failed to configure power-off GPIO\n");
>  }
> -- 
> 1.7.10.4
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130109/4287e2b0/attachment.sig>


More information about the linux-arm-kernel mailing list