[PATCH] ARM: DT: Exynos5250: fix number of interrupt-cells in mct node

[Chander Kashyap]

Ki Kukjin,

On 28 August 2013 17:36, Chander Kashyap <chander.kashyap at linaro.org> wrote:
> On 28 August 2013 16:48, Tomasz Figa <t.figa at samsung.com> wrote:
>> Hi Chander,
>>
>> On Wednesday 28 of August 2013 16:30:41 Chander Kashyap wrote:
>>> Two cells were used to specify interrupts in mct node, while second cell
>>> always remains unused. Hence use only one cell.
>>> Suggested by Tomasz Figa.
>>>
>>> Signed-off-by: Chander Kashyap <chander.kashyap at linaro.org>
>>> ---
>>> changes in v2:
>>>       - Drop Changes for Exynos4 as done in separate patch by Tomasz
>>>
>>>  arch/arm/boot/dts/exynos5250.dtsi |   19 +++++++++----------
>>>  1 file changed, 9 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>>> b/arch/arm/boot/dts/exynos5250.dtsi index ef57277..f2f178a 100644
>>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>>> @@ -102,23 +102,22 @@
>>>               compatible = "samsung,exynos4210-mct";
>>>               reg = <0x101C0000 0x800>;
>>>               interrupt-controller;
>>> -             #interrups-cells = <2>;
>>> +             #interrups-cells = <1>;
>>
>> Those two properties above are unused and in fact incorrect, because MCT is
>> not an interrupt controller, so they could be removed in a follow-up patch.
>
> Thanks for the correction. I will remove them.
>
>>
>> You can also check out the clean-up series I mentioned for other things
>> that could be cleaned up in Exynos 5 dtsi files.
>
> ok
>
>>
>>>               interrupt-parent = <&mct_map>;
>>> -             interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
>>> -                          <4 0>, <5 0>;
>>> +             interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
>>>               clocks = <&clock 1>, <&clock 335>;
>>>               clock-names = "fin_pll", "mct";
>>>
>>>               mct_map: mct-map {
>>> -                     #interrupt-cells = <2>;
>>> +                     #interrupt-cells = <1>;
>>>                       #address-cells = <0>;
>>>                       #size-cells = <0>;
>>> -                     interrupt-map = <0x0 0 &combiner 23 3>,
>>> -                                     <0x1 0 &combiner 23 4>,
>>> -                                     <0x2 0 &combiner 25 2>,
>>> -                                     <0x3 0 &combiner 25 3>,
>>> -                                     <0x4 0 &gic 0 120 0>,
>>> -                                     <0x5 0 &gic 0 121 0>;
>>> +                     interrupt-map = <0 &combiner 23 3>,
>>> +                                     <1 &combiner 23 4>,
>>> +                                     <2 &combiner 25 2>,
>>> +                                     <3 &combiner 25 3>,
>>> +                                     <4 &gic 0 120 0>,
>>> +                                     <5 &gic 0 121 0>;
>>>               };
>>>       };
>>
>> Otherwise, looks fine. Thanks.
>
> Thanks
>

Kindly Ignore this patch, i will send it with another patch series.

>>
>> Best regards,
>> Tomasz
>>
>
>
>
> --
> with warm regards,
> Chander Kashyap



-- 
with warm regards,
Chander Kashyap