[PATCH 3/9] ARM: at91/dt: add usb1 vbus and pullup pins

[Boris BREZILLON]

Add vbus and pullup pinctrl definitions.
Request the vbus and pullup pins in usb1 node.

Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
---
 arch/arm/boot/dts/at91rm9200ek.dts |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 37b0880..76f3e87 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -29,6 +29,18 @@
 
 	ahb {
 		apb {
+			pinctrl at fffff400 {
+				usb1 {
+					pinctrl_usb1_vbus: usb1_vbus-0 {
+						atmel,pins = <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usb1_pullup: usb1_pullup-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+			};
+
 			dbgu: serial at fffff200 {
 				status = "okay";
 			};
@@ -56,6 +68,9 @@
 
 			usb1: gadget at fffb0000 {
 				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usb1_vbus
+					     &pinctrl_usb1_pullup>;
 				status = "okay";
 			};
 
-- 
1.7.9.5