[GIT PULL 3/3] 2nd Round Samsung mach-exynos for v3.12

[Kukjin Kim]

Bartlomiej Zolnierkiewicz wrote:

[...]

> > > is incorrect as noted a month ago in:
> > >
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2013-
> July/186355.html
> > >
> > > [ Because of the deficiency in the core cpuidle core (device-
> >state_count
> > >   not being used by governors' code) only sysfs entries for C1 state
> will be
> > >   disabled and EXYNOS cpuidle driver will still attempt to use C1
> state.
> > >
> > > also non-working device->state_count is planned to be removed by:
> > >
> > > http://permalink.gmane.org/gmane.linux.power-management.general/37390
> > I looked at your patch series and it seems reasonable. I will repost
> > this patch on top of yours.
> 
> If you correctly use driver's state_count (instead of device's) there will
> be
> no dependency on my patch series and the new patch can be applied
> immediately.
> 
> > But I suggest to keep this patch temporary till your patch series gets
> merged.
> 
> The current patch (the one Kukjin merged) is incorrect as it just doesn't
> do what it advertises. I see no reason to keep it.
> 
Well, I don't think so, because if the patch is missing, following kernel
panic happens on exynos5440 platform.

Unable to handle kernel paging request at virtual address f8180608
pgd = c0003000
[f8180608] *pgd=80000080007003, *pmd=af7fb003, *pte=00000000
Internal error: Oops: a07 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-0-generic
#1~d20130819t044008~3372c79
task: c0529d80 ti: c051e000 task.ti: c051e000
PC is at exynos4_enter_lowpower+0x18/0x130
LR is at cpuidle_enter_state+0x3c/0xe8
pc : []    lr : []    psr: 200f0093
sp : c051ff68  ip : 00000018  fp : 00000000
r10: 00000000  r9 : 412fc0f3  r8 : 00000000
r7 : c052c9cc  r6 : 00000001  r5 : 00000000  r4 : d5c3cc94
r3 : f8180000  r2 : 0000ff3e  r1 : c052c980  r0 : c052cc98
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 30c5387d  Table: af139b00  DAC: fffffffd
Process swapper (pid: 0, stack limit = 0xc051e230)
Stack: (0xc051ff68 to 0xc0520000)
ff60:                   d5c3cc94 00000000 c052cc98 c02c1310 d5c3cc94
00000000
ff80: c0550288 c052c980 c058898c c052cc98 00000001 c052c980 c058898c
c02c1458
ffa0: c051e000 c0550288 c0550288 00000001 c05260dc c001b2cc 000001fe
c00573e4
ffc0: ffffffff c04f07d8 ffffffff ffffffff c04f0290 00000000 00000000
c05134d8
ffe0: 30c7387d c0526064 c05134d4 c052b5b4 80007000 80008080 00000000
00000000
[] (exynos4_enter_lowpower+0x18/0x130) from []
(cpuidle_enter_state+0x3c/0xe8)
[] (cpuidle_enter_state+0x3c/0xe8) from [] (cpuidle_idle_call+0x9c/0x140)
[] (cpuidle_idle_call+0x9c/0x140) from [] (arch_cpu_idle+0x8/0x38)
[] (arch_cpu_idle+0x8/0x38) from [] (cpu_startup_entry+0x4c/0x114)
[] (cpu_startup_entry+0x4c/0x114) from [] (start_kernel+0x324/0x37c)
Code: 0a000043 e3a03000 e30f2f3e e34f3818 (e5832608) 
---[ end trace 617b9e1a4ff91d2f ]---
Kernel panic - not syncing: Attempted to kill the idle task!

In addition, I didn't see your patches in linux-next for upcoming merge
window. So I think, if any fixup is required, it should be done on top of
current shape.

- Kukjin