[GIT PULL 3/3] 2nd Round Samsung mach-exynos for v3.12
Bartlomiej Zolnierkiewicz
b.zolnierkie at samsung.com
Mon Aug 26 07:19:11 EDT 2013
On Monday, August 26, 2013 04:33:55 PM amit daniel kachhap wrote:
> Hi,
>
> On Mon, Aug 26, 2013 at 3:36 PM, Bartlomiej Zolnierkiewicz
> <b.zolnierkie at samsung.com> wrote:
> >
> > Hi,
> >
> > On Monday, August 26, 2013 09:14:42 AM Kukjin Kim wrote:
> >> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
> >>
> >> Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> >> tags/samsung-mach-exynos
> >>
> >> for you to fetch changes up to f52616f4233d71d0fb00f06f86d046d18d2b7f3b:
> >>
> >> ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 (2013-08-19
> >> 05:05:16 +0900)
> >>
> >> ----------------------------------------------------------------
> >> update mach-exynos
> >> - enable ARCH_HAS_BANDGAP for exynos SoCs
> >> - skip C1 cpuidle for exynos5440 because non-supporting
> >> - always enable PM domains for exynos4x12
> >>
> >> ----------------------------------------------------------------
> >> Amit Daniel Kachhap (2):
> >> ARM: EXYNOS: enable ARCH_HAS_BANDGAP
> >> ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
> >
> > The patch "ARM: EXYNOS: Skip C1 cpuidle state for exynos5440":
> >
> > --- a/arch/arm/mach-exynos/cpuidle.c
> > +++ b/arch/arm/mach-exynos/cpuidle.c
> > @@ -210,7 +210,7 @@ static int __init exynos4_init_cpuidle(void)
> > device->cpu = cpu_id;
> >
> > /* Support IDLE only */
> > - if (cpu_id != 0)
> > + if (soc_is_exynos5440() || cpu_id != 0)
> > device->state_count = 1;
> >
> > ret = cpuidle_register_device(device);
> >
> > is incorrect as noted a month ago in:
> >
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/186355.html
> >
> > [ Because of the deficiency in the core cpuidle core (device->state_count
> > not being used by governors' code) only sysfs entries for C1 state will be
> > disabled and EXYNOS cpuidle driver will still attempt to use C1 state.
> >
> > also non-working device->state_count is planned to be removed by:
> >
> > http://permalink.gmane.org/gmane.linux.power-management.general/37390
> I looked at your patch series and it seems reasonable. I will repost
> this patch on top of yours.
If you correctly use driver's state_count (instead of device's) there will be
no dependency on my patch series and the new patch can be applied immediately.
> But I suggest to keep this patch temporary till your patch series gets merged.
The current patch (the one Kukjin merged) is incorrect as it just doesn't
do what it advertises. I see no reason to keep it.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> Thanks,
> Amit Daniel
> >
> >
> > To disable C1 state on EXYNOS5440 something like:
> >
> > static int __init exynos4_init_cpuidle(void)
> > {
> > ...
> > if (soc_is_exynos5440())
> > exynos4_idle_driver.state_count = 1;
> > ...
> > }
> >
> > should be done instead.
> >
> > Best regards,
> > --
> > Bartlomiej Zolnierkiewicz
> > Samsung R&D Institute Poland
> > Samsung Electronics
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
> On Mon, Aug 26, 2013 at 3:36 PM, Bartlomiej Zolnierkiewicz
> <b.zolnierkie at samsung.com> wrote:
> >
> > Hi,
> >
> > On Monday, August 26, 2013 09:14:42 AM Kukjin Kim wrote:
> >> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
> >>
> >> Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> >> tags/samsung-mach-exynos
> >>
> >> for you to fetch changes up to f52616f4233d71d0fb00f06f86d046d18d2b7f3b:
> >>
> >> ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 (2013-08-19
> >> 05:05:16 +0900)
> >>
> >> ----------------------------------------------------------------
> >> update mach-exynos
> >> - enable ARCH_HAS_BANDGAP for exynos SoCs
> >> - skip C1 cpuidle for exynos5440 because non-supporting
> >> - always enable PM domains for exynos4x12
> >>
> >> ----------------------------------------------------------------
> >> Amit Daniel Kachhap (2):
> >> ARM: EXYNOS: enable ARCH_HAS_BANDGAP
> >> ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
> >
> > The patch "ARM: EXYNOS: Skip C1 cpuidle state for exynos5440":
> >
> > --- a/arch/arm/mach-exynos/cpuidle.c
> > +++ b/arch/arm/mach-exynos/cpuidle.c
> > @@ -210,7 +210,7 @@ static int __init exynos4_init_cpuidle(void)
> > device->cpu = cpu_id;
> >
> > /* Support IDLE only */
> > - if (cpu_id != 0)
> > + if (soc_is_exynos5440() || cpu_id != 0)
> > device->state_count = 1;
> >
> > ret = cpuidle_register_device(device);
> >
> > is incorrect as noted a month ago in:
> >
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/186355.html
> >
> > [ Because of the deficiency in the core cpuidle core (device->state_count
> > not being used by governors' code) only sysfs entries for C1 state will be
> > disabled and EXYNOS cpuidle driver will still attempt to use C1 state.
> >
> > also non-working device->state_count is planned to be removed by:
> >
> > http://permalink.gmane.org/gmane.linux.power-management.general/37390
> >
> >
> > To disable C1 state on EXYNOS5440 something like:
> >
> > static int __init exynos4_init_cpuidle(void)
> > {
> > ...
> > if (soc_is_exynos5440())
> > exynos4_idle_driver.state_count = 1;
> > ...
> > }
> >
> > should be done instead.
> >
> > Best regards,
> > --
> > Bartlomiej Zolnierkiewicz
> > Samsung R&D Institute Poland
> > Samsung Electronics
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list