[PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers

[Chris Ball]

Hi Laurent,

On Thu, Aug 08 2013, Laurent Pinchart wrote:
> This patch set replaces callbacks to board code with regulators and GPIOs in
> the mmc_spi, sh_mmcif and sh_mobile_sdhi MMC drivers.
>
> Most of the required infrastructure is in place already on the drivers side,
> except for CD debouncing support in the MMC core and CD/RO GPIOs support in
> the mmc_spi driver. The series thus starts with patches 01/14 and 02/14 that
> add those features to the MMC core and mmc_spi driver.
>
> Patches 03/14 to 07/14 remove the board callbacks from the ecovec24 and
> vision_ep9307 boards. The code has been compile-tested only as I don't have
> access to those boards.
>
> Patches 08/14 to 14/14 then proceed to remove the callbacks from the drivers
> themselves and from the platform data structures.

arch/arm/mach-shmobile/board-ag5evm.c has been removed from
linux-next, so I've dropped patch 7 ("ARM: shmobile: ag5evm: Remove
SDHI .set_pwr() callback") but taken all of the other patches into
mmc-next for 3.12.

Thanks!

- Chris.
-- 
Chris Ball   <cjb at laptop.org>   <http://printf.net/>