[PATCH v3 00/14] Remove platform callbacks from mmc_spi, sh_mmcif and sh_mobile_sdhi drivers
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Fri Aug 23 21:28:30 EDT 2013
Hi Chris,
On Thursday 08 August 2013 12:38:30 Laurent Pinchart wrote:
> Hello,
>
> This patch set replaces callbacks to board code with regulators and GPIOs in
> the mmc_spi, sh_mmcif and sh_mobile_sdhi MMC drivers.
>
> Most of the required infrastructure is in place already on the drivers side,
> except for CD debouncing support in the MMC core and CD/RO GPIOs support in
> the mmc_spi driver. The series thus starts with patches 01/14 and 02/14
> that add those features to the MMC core and mmc_spi driver.
>
> Patches 03/14 to 07/14 remove the board callbacks from the ecovec24 and
> vision_ep9307 boards. The code has been compile-tested only as I don't have
> access to those boards.
>
> Patches 08/14 to 14/14 then proceed to remove the callbacks from the drivers
> themselves and from the platform data structures.
>
> Compared to v2, the patches have been rebased on the mmc-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git. I've also added
> patch 07/14 that removes the .set_pwr() callback from the ag5evm board to
> avoid compilation breakage during bisection.
>
> The series interleaves patches for drivers and board files. The ep93xx and
> ecovec24 patches have been acked, and the respective ARM subtree maintainers
> have indicated that they are fine with the patches going through the MMC
> tree. The ag5evm patch is new, but as the ag5evm board is going to be
> removed in v3.12, it shouldn't cause any issue.
>
> Chris, could you take the patches in your tree ? I've pushed them to
>
> git://linuxtv.org/pinchartl/fbdev.git mmc/devel
Ping ?
The following changes since commit 6d1d6b4759112acf4c079eb3a0dd296bdbf61cf5:
mmc: tmio: fix compiler warning (2013-07-23 15:06:47 -0400)
are available in the git repository at:
git://linuxtv.org/pinchartl/fbdev.git mmc/devel
for you to fetch changes up to a3424b35fdfd2d0fe507ef204d4ddebadd1e1157:
mmc: tmio-mmc: Remove .set_pwr() callback from platform data (2013-08-08
12:34:33 +0200)
----------------------------------------------------------------
Laurent Pinchart (14):
mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
mmc: mmc_spi: Support CD/RO GPIOs
ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
sh: ecovec24: Use MMC/SDHI CD and RO GPIO
sh: ecovec24: Remove mmcif .down_pwr() callback
sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
mmc: sh_mmcif: Remove .down_pwr() callback from platform data
mmc: sh_mmcif: Remove .set_pwr() callback from platform data
mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
mmc: tmio-mmc: Remove .get_cd() callback from platform data
mmc: tmio-mmc: Remove .set_pwr() callback from platform data
arch/arm/mach-ep93xx/vision_ep9307.c | 57 +++------------------------
arch/arm/mach-shmobile/board-ag5evm.c | 23 -----------
arch/sh/boards/mach-ecovec24/setup.c | 89 +++-------------------------------
drivers/mmc/core/host.c | 2 +-
drivers/mmc/core/slot-gpio.c | 14 ++++++-
drivers/mmc/host/jz4740_mmc.c | 2 +-
drivers/mmc/host/mmc_spi.c | 49 +++++++++++-------------
drivers/mmc/host/mvsdio.c | 3 +-
drivers/mmc/host/of_mmc_spi.c | 46 ++++++----------------
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
drivers/mmc/host/sdhci-pxav3.c | 3 +-
drivers/mmc/host/sdhci-sirf.c | 2 +-
drivers/mmc/host/sh_mmcif.c | 5 +--
drivers/mmc/host/sh_mobile_sdhi.c | 18 ---------
drivers/mmc/host/tmio_mmc.h | 1 -
drivers/mmc/host/tmio_mmc_pio.c | 25 +-----------
include/linux/mfd/tmio.h | 2 -
include/linux/mmc/sh_mmcif.h | 2 -
include/linux/mmc/sh_mobile_sdhi.h | 2 -
include/linux/mmc/slot-gpio.h | 3 +-
include/linux/spi/mmc_spi.h | 19 ++++++---
21 files changed, 86 insertions(+), 283 deletions(-)
> Laurent Pinchart (14):
> mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()
> mmc: mmc_spi: Support CD/RO GPIOs
> ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIO
> sh: ecovec24: Use MMC/SDHI CD and RO GPIO
> sh: ecovec24: Remove mmcif .down_pwr() callback
> sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacks
> ARM: shmobile: ag5evm: Remove SDHI .set_pwr() callback
> mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacks
> mmc: sh_mmcif: Remove .down_pwr() callback from platform data
> mmc: sh_mmcif: Remove .set_pwr() callback from platform data
> mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform data
> mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
> mmc: tmio-mmc: Remove .get_cd() callback from platform data
> mmc: tmio-mmc: Remove .set_pwr() callback from platform data
>
> arch/arm/mach-ep93xx/vision_ep9307.c | 57 ++--------------------
> arch/arm/mach-shmobile/board-ag5evm.c | 23 ---------
> arch/sh/boards/mach-ecovec24/setup.c | 89 ++++----------------------------
> drivers/mmc/core/host.c | 2 +-
> drivers/mmc/core/slot-gpio.c | 14 +++++-
> drivers/mmc/host/jz4740_mmc.c | 2 +-
> drivers/mmc/host/mmc_spi.c | 49 +++++++++----------
> drivers/mmc/host/mvsdio.c | 3 +-
> drivers/mmc/host/of_mmc_spi.c | 46 +++++-------------
> drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
> drivers/mmc/host/sdhci-pxav3.c | 3 +-
> drivers/mmc/host/sdhci-sirf.c | 2 +-
> drivers/mmc/host/sh_mmcif.c | 5 +-
> drivers/mmc/host/sh_mobile_sdhi.c | 18 -------
> drivers/mmc/host/tmio_mmc.h | 1 -
> drivers/mmc/host/tmio_mmc_pio.c | 25 +---------
> include/linux/mfd/tmio.h | 2 -
> include/linux/mmc/sh_mmcif.h | 2 -
> include/linux/mmc/sh_mobile_sdhi.h | 2 -
> include/linux/mmc/slot-gpio.h | 3 +-
> include/linux/spi/mmc_spi.h | 19 +++++---
> 21 files changed, 86 insertions(+), 283 deletions(-)
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list