[PATCH 5/5] ARM: at91: at91rm9200: set default mmc0 pinctrl-names

[Nicolas Ferre]

On 25/06/2013 12:35, Nicolas Ferre :
> On 17/06/2013 14:38, Jean-Christophe PLAGNIOL-VILLARD :
>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
>> ---
>>    arch/arm/boot/dts/at91rm9200.dtsi |    1 +
>>    1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
>> index 1fc645e..8bc87e5 100644
>> --- a/arch/arm/boot/dts/at91rm9200.dtsi
>> +++ b/arch/arm/boot/dts/at91rm9200.dtsi
>> @@ -116,6 +116,7 @@
>>    				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
>>    				#address-cells = <1>;
>>    				#size-cells = <0>;
>> +				pinctrl-names = "default";
>
> You do not add a pinctrl cell: is it normal? Which pinctrl definition
> does it take then?

Okay, same fix that the one for 9260/9g20. So I take this one without a 
change:

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

>
>>    				status = "disabled";
>>    			};
>>
>>
>
>


-- 
Nicolas Ferre