[PATCH v2 0/3] arm: atmel: at91sam9n12: add i2c pinctrl and qt1070 support
Nicolas Ferre
nicolas.ferre at atmel.com
Wed Aug 21 05:35:40 EDT 2013
On 11/07/2013 05:30, Bo Shen :
> this patch is based on linux master branch, implementation as following:
> - add the i2c pinctrl which needed for using at91sam9n12 TWI
> - enable qt1070
> - trival fix for the gpio-key pin number
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
On the whole series.
>
> Changes in v2:
> - remove comments as use micro
> - using micro for interrupt trigger mode
>
> Bo Shen (3):
> arm: atmel: at91sam9n12: add pinctrl of TWI
Beware:
1/ "arm" in upper case
2/ not "atmel" as second identifier but "at91" (lower case)
> arm: atmel: at91sam9n12: add qt1070 support
> arm: atmel: at91sam9n12: correct pin number of gpio-key
>
> arch/arm/boot/dts/at91sam9n12.dtsi | 20 ++++++++++++++++++++
> arch/arm/boot/dts/at91sam9n12ek.dts | 18 +++++++++++++++++-
> 2 files changed, 37 insertions(+), 1 deletion(-)
>
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list