[PATCH] ARM: at91/dt: split sam9x5 peripheral definitions
boris brezillon
b.brezillon at overkiz.com
Thu Aug 8 11:52:44 EDT 2013
On 08/08/2013 17:23, boris brezillon wrote:
> Hello Jean-Christophe,
>
> On 08/08/2013 16:07, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 12:14 Wed 07 Aug , Boris BREZILLON wrote:
>>> This patch splits the sam9x5 peripheral definitions into:
>>> - a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
>>> - several optional peripheral definitions which will be included by
>>> specific
>>> sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)
>>>
>>> This provides a better representation of the real hardware (drop
>>> unneeded
>>> dt nodes) and avoids future peripheral id conflict (lcdc and isi
>>> both use
>>> peripheral id 25).
>> I really don't like this
>>
>> the mapping is soc specific (here familly) so I does not see any
>> advantage
>> except move files so NO for me
> Let me explain in detail why I did that.
>
> This separation was part of the "at91 common clk" series and was here
> to avoid the
> definition of unavailable clocks or definition of clocks with the same
> id (which may result
> in bad clk registration).
> If we keep all the definitions in one .dtsi file (even the one which
> are not really available),
> I may need to add a new property to each peripheral (and system) clk
> node to specify the
> availabilty of the clock (something similar to 'status="disabled"' in
> device nodes).
>
> As explained to Thomas, I thought device tree was here to give a real
> description of the
> hardware parts (in case of sam9x5.dtsi the description of the common
> parts of sam9x5 SoC
> family).
> If you define peripherals that are not present in a SoC (lets say
> macb0 for sam9g15) you break
> this rule.
>
> I'm not telling I have the right approach here, I'm just trying to
> understand what should be done and
> what should not.
>
> Finally, I'd like to point that the memory footprint of the dtb file
> generated after this patch has been
> applied is bit smaller (even if it won't make a real difference):
>
> with this patch:
>
> 15937 arch/arm/boot/dts/at91-ariag25.dtb
> 15860 arch/arm/boot/dts/at91sam9g15ek.dtb
> 16905 arch/arm/boot/dts/at91sam9g25ek.dtb
> 16473 arch/arm/boot/dts/at91sam9g35ek.dtb
> 17341 arch/arm/boot/dts/at91sam9x25ek.dtb
This one is bigger because usart3 periph node was not defined in
sam9x5.dtsi and is defined
in sam9x5_usart3.dtsi.
>
> 16473 arch/arm/boot/dts/at91sam9x35ek.dtb
>
> without this patch:
>
> 16077 arch/arm/boot/dts/at91-ariag25.dtb
> 16824 arch/arm/boot/dts/at91sam9g15ek.dtb
> 16849 arch/arm/boot/dts/at91sam9g25ek.dtb
> 16849 arch/arm/boot/dts/at91sam9g35ek.dtb
> 15017 arch/arm/boot/dts/at91sam9m10g45ek.dtb
sam9m10g45ek is not part of the sam9x5 family
>
> 17145 arch/arm/boot/dts/at91sam9x25ek.dtb
> 16849 arch/arm/boot/dts/at91sam9x35ek.dtb
>
> Best Regards,
>
> Boris
>
>> Best Regards,
>> J.
>>> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
>>> ---
>>> arch/arm/boot/dts/at91sam9g25.dtsi | 2 +
>>> arch/arm/boot/dts/at91sam9g35.dtsi | 1 +
>>> arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++---------
>>> arch/arm/boot/dts/at91sam9x35.dtsi | 1 +
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 67
>>> ------------------------------
>>> arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56
>>> +++++++++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51
>>> +++++++++++++++++++++++
>>> 8 files changed, 158 insertions(+), 88 deletions(-)
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi
>>> b/arch/arm/boot/dts/at91sam9g25.dtsi
>>> index b4ec6fe..17b8799 100644
>>> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
>>> @@ -7,6 +7,8 @@
>>> */
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_usart3.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>> / {
>>> model = "Atmel AT91SAM9G25 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi
>>> b/arch/arm/boot/dts/at91sam9g35.dtsi
>>> index bebf9f5..e35c2fc 100644
>>> --- a/arch/arm/boot/dts/at91sam9g35.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g35.dtsi
>>> @@ -7,6 +7,7 @@
>>> */
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>> / {
>>> model = "Atmel AT91SAM9G35 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi
>>> b/arch/arm/boot/dts/at91sam9x25.dtsi
>>> index 49e94ab..c255421 100644
>>> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
>>> @@ -7,6 +7,9 @@
>>> */
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_usart3.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>> +#include "at91sam9x5_macb1.dtsi"
>>> / {
>>> model = "Atmel AT91SAM9X25 SoC";
>>> @@ -22,27 +25,6 @@
>>> 0x80000000 0xfffd0000 0xb83fffff /* pioC */
>>> 0x003fffff 0x003f8000 0x00000000 /* pioD */
>>> >;
>>> -
>>> - macb1 {
>>> - pinctrl_macb1_rmii: macb1_rmii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 16 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC16 periph B */
>>> - AT91_PIOC 18 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC18 periph B */
>>> - AT91_PIOC 19 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC19 periph B */
>>> - AT91_PIOC 20 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC20 periph B */
>>> - AT91_PIOC 21 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC21 periph B */
>>> - AT91_PIOC 27 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC27 periph B */
>>> - AT91_PIOC 28 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC28 periph B */
>>> - AT91_PIOC 29 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC29 periph B */
>>> - AT91_PIOC 30 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC30 periph B */
>>> - AT91_PIOC 31 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC31 periph B */
>>> - };
>>> - };
>>> - };
>>> -
>>> - macb1: ethernet at f8030000 {
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_macb1_rmii>;
>>> };
>>> };
>>> };
>>> diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi
>>> b/arch/arm/boot/dts/at91sam9x35.dtsi
>>> index 1a3d525..8eac66c 100644
>>> --- a/arch/arm/boot/dts/at91sam9x35.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x35.dtsi
>>> @@ -7,6 +7,7 @@
>>> */
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>> / {
>>> model = "Atmel AT91SAM9X35 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi
>>> b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> index 57d45f5..05f4c74 100644
>>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> @@ -206,29 +206,6 @@
>>> };
>>> };
>>> - usart3 {
>>> - pinctrl_usart3: usart3-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 22 AT91_PERIPH_B
>>> AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>>> - AT91_PIOC 23 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC23 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_rts: usart3_rts-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 24 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC24 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_cts: usart3_cts-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 25 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC25 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_sck: usart3_sck-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 26 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC26 periph B */
>>> - };
>>> - };
>>> -
>>> uart0 {
>>> pinctrl_uart0: uart0-0 {
>>> atmel,pins =
>>> @@ -277,34 +254,6 @@
>>> };
>>> };
>>> - macb0 {
>>> - pinctrl_macb0_rmii: macb0_rmii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOB 0 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB0 periph A */
>>> - AT91_PIOB 1 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB1 periph A */
>>> - AT91_PIOB 2 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB2 periph A */
>>> - AT91_PIOB 3 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB3 periph A */
>>> - AT91_PIOB 4 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB4 periph A */
>>> - AT91_PIOB 5 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB5 periph A */
>>> - AT91_PIOB 6 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB6 periph A */
>>> - AT91_PIOB 7 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB7 periph A */
>>> - AT91_PIOB 9 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB9 periph A */
>>> - AT91_PIOB 10 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE>; /* PB10 periph A */
>>> - };
>>> -
>>> - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOB 8 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB8 periph A */
>>> - AT91_PIOB 11 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB11 periph A */
>>> - AT91_PIOB 12 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB12 periph A */
>>> - AT91_PIOB 13 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB13 periph A */
>>> - AT91_PIOB 14 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB14 periph A */
>>> - AT91_PIOB 15 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB15 periph A */
>>> - AT91_PIOB 16 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB16 periph A */
>>> - AT91_PIOB 17 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE>; /* PB17 periph A */
>>> - };
>>> - };
>>> -
>>> mmc0 {
>>> pinctrl_mmc0_slot0_clk_cmd_dat0:
>>> mmc0_slot0_clk_cmd_dat0-0 {
>>> atmel,pins =
>>> @@ -605,22 +554,6 @@
>>> status = "disabled";
>>> };
>>> - macb0: ethernet at f802c000 {
>>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> - reg = <0xf802c000 0x100>;
>>> - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_macb0_rmii>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - macb1: ethernet at f8030000 {
>>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> - reg = <0xf8030000 0x100>;
>>> - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>>> - status = "disabled";
>>> - };
>>> -
>>> i2c0: i2c at f8010000 {
>>> compatible = "atmel,at91sam9x5-i2c";
>>> reg = <0xf8010000 0x100>;
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> new file mode 100644
>>> index 0000000..55731ff
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> @@ -0,0 +1,56 @@
>>> +/*
>>> + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5
>>> SoC with 1
>>> + * Ethernet interface.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl at fffff400 {
>>> + macb0 {
>>> + pinctrl_macb0_rmii: macb0_rmii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 0 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB0 periph A */
>>> + AT91_PIOB 1 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB1 periph A */
>>> + AT91_PIOB 2 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB2 periph A */
>>> + AT91_PIOB 3 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB3 periph A */
>>> + AT91_PIOB 4 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB4 periph A */
>>> + AT91_PIOB 5 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB5 periph A */
>>> + AT91_PIOB 6 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB6 periph A */
>>> + AT91_PIOB 7 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB7 periph A */
>>> + AT91_PIOB 9 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB9 periph A */
>>> + AT91_PIOB 10 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE>; /* PB10 periph A */
>>> + };
>>> +
>>> + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 8 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB8 periph A */
>>> + AT91_PIOB 11 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB11 periph A */
>>> + AT91_PIOB 12 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB12 periph A */
>>> + AT91_PIOB 13 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB13 periph A */
>>> + AT91_PIOB 14 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB14 periph A */
>>> + AT91_PIOB 15 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB15 periph A */
>>> + AT91_PIOB 16 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE /* PB16 periph A */
>>> + AT91_PIOB 17 AT91_PERIPH_A
>>> AT91_PINCTRL_NONE>; /* PB17 periph A */
>>> + };
>>> + };
>>> + };
>>> +
>>> + macb0: ethernet at f802c000 {
>>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> + reg = <0xf802c000 0x100>;
>>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_macb0_rmii>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> new file mode 100644
>>> index 0000000..77425a6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> @@ -0,0 +1,44 @@
>>> +/*
>>> + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5
>>> SoC with 2
>>> + * Ethernet interfaces.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl at fffff400 {
>>> + macb1 {
>>> + pinctrl_macb1_rmii: macb1_rmii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 16 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC16 periph B */
>>> + AT91_PIOC 18 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC18 periph B */
>>> + AT91_PIOC 19 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC19 periph B */
>>> + AT91_PIOC 20 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC20 periph B */
>>> + AT91_PIOC 21 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC21 periph B */
>>> + AT91_PIOC 27 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC27 periph B */
>>> + AT91_PIOC 28 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC28 periph B */
>>> + AT91_PIOC 29 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC29 periph B */
>>> + AT91_PIOC 30 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE /* PC30 periph B */
>>> + AT91_PIOC 31 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC31 periph B */
>>> + };
>>> + };
>>> + };
>>> +
>>> + macb1: ethernet at f8030000 {
>>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> + reg = <0xf8030000 0x100>;
>>> + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_macb1_rmii>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> new file mode 100644
>>> index 0000000..5589579
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> @@ -0,0 +1,51 @@
>>> +/*
>>> + * at91sam9x5_lcdc.dtsi - Device Tree Include file for AT91SAM9x5
>>> SoC with
>>> + * 4 USART.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl at fffff400 {
>>> + usart3 {
>>> + pinctrl_usart3: usart3-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 22 AT91_PERIPH_B
>>> AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>>> + AT91_PIOC 23 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC23 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_rts: usart3_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 24 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC24 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_cts: usart3_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 25 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC25 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_sck: usart3_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 26 AT91_PERIPH_B
>>> AT91_PINCTRL_NONE>; /* PC26 periph B */
>>> + };
>>> + };
>>> + };
>>> +
>>> + usart3: serial at f8028000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xf8028000 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart3>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> --
>>> 1.7.9.5
>>>
>
More information about the linux-arm-kernel
mailing list