[PATCH] ARM: at91/dt: split sam9x5 peripheral definitions
boris brezillon
b.brezillon at overkiz.com
Thu Aug 8 11:23:06 EDT 2013
Hello Jean-Christophe,
On 08/08/2013 16:07, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:14 Wed 07 Aug , Boris BREZILLON wrote:
>> This patch splits the sam9x5 peripheral definitions into:
>> - a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
>> - several optional peripheral definitions which will be included by specific
>> sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)
>>
>> This provides a better representation of the real hardware (drop unneeded
>> dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
>> peripheral id 25).
> I really don't like this
>
> the mapping is soc specific (here familly) so I does not see any advantage
> except move files so NO for me
Let me explain in detail why I did that.
This separation was part of the "at91 common clk" series and was here to
avoid the
definition of unavailable clocks or definition of clocks with the same
id (which may result
in bad clk registration).
If we keep all the definitions in one .dtsi file (even the one which are
not really available),
I may need to add a new property to each peripheral (and system) clk
node to specify the
availabilty of the clock (something similar to 'status="disabled"' in
device nodes).
As explained to Thomas, I thought device tree was here to give a real
description of the
hardware parts (in case of sam9x5.dtsi the description of the common
parts of sam9x5 SoC
family).
If you define peripherals that are not present in a SoC (lets say macb0
for sam9g15) you break
this rule.
I'm not telling I have the right approach here, I'm just trying to
understand what should be done and
what should not.
Finally, I'd like to point that the memory footprint of the dtb file
generated after this patch has been
applied is bit smaller (even if it won't make a real difference):
with this patch:
15937 arch/arm/boot/dts/at91-ariag25.dtb
15860 arch/arm/boot/dts/at91sam9g15ek.dtb
16905 arch/arm/boot/dts/at91sam9g25ek.dtb
16473 arch/arm/boot/dts/at91sam9g35ek.dtb
17341 arch/arm/boot/dts/at91sam9x25ek.dtb
16473 arch/arm/boot/dts/at91sam9x35ek.dtb
without this patch:
16077 arch/arm/boot/dts/at91-ariag25.dtb
16824 arch/arm/boot/dts/at91sam9g15ek.dtb
16849 arch/arm/boot/dts/at91sam9g25ek.dtb
16849 arch/arm/boot/dts/at91sam9g35ek.dtb
15017 arch/arm/boot/dts/at91sam9m10g45ek.dtb
17145 arch/arm/boot/dts/at91sam9x25ek.dtb
16849 arch/arm/boot/dts/at91sam9x35ek.dtb
Best Regards,
Boris
> Best Regards,
> J.
>> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
>> ---
>> arch/arm/boot/dts/at91sam9g25.dtsi | 2 +
>> arch/arm/boot/dts/at91sam9g35.dtsi | 1 +
>> arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++---------
>> arch/arm/boot/dts/at91sam9x35.dtsi | 1 +
>> arch/arm/boot/dts/at91sam9x5.dtsi | 67 ------------------------------
>> arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56 +++++++++++++++++++++++++
>> arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++
>> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51 +++++++++++++++++++++++
>> 8 files changed, 158 insertions(+), 88 deletions(-)
>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>> create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>
>> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
>> index b4ec6fe..17b8799 100644
>> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
>> @@ -7,6 +7,8 @@
>> */
>>
>> #include "at91sam9x5.dtsi"
>> +#include "at91sam9x5_usart3.dtsi"
>> +#include "at91sam9x5_macb0.dtsi"
>>
>> / {
>> model = "Atmel AT91SAM9G25 SoC";
>> diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
>> index bebf9f5..e35c2fc 100644
>> --- a/arch/arm/boot/dts/at91sam9g35.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9g35.dtsi
>> @@ -7,6 +7,7 @@
>> */
>>
>> #include "at91sam9x5.dtsi"
>> +#include "at91sam9x5_macb0.dtsi"
>>
>> / {
>> model = "Atmel AT91SAM9G35 SoC";
>> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
>> index 49e94ab..c255421 100644
>> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
>> @@ -7,6 +7,9 @@
>> */
>>
>> #include "at91sam9x5.dtsi"
>> +#include "at91sam9x5_usart3.dtsi"
>> +#include "at91sam9x5_macb0.dtsi"
>> +#include "at91sam9x5_macb1.dtsi"
>>
>> / {
>> model = "Atmel AT91SAM9X25 SoC";
>> @@ -22,27 +25,6 @@
>> 0x80000000 0xfffd0000 0xb83fffff /* pioC */
>> 0x003fffff 0x003f8000 0x00000000 /* pioD */
>> >;
>> -
>> - macb1 {
>> - pinctrl_macb1_rmii: macb1_rmii-0 {
>> - atmel,pins =
>> - <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
>> - AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
>> - AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
>> - AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
>> - AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
>> - AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
>> - AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
>> - AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
>> - AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
>> - AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
>> - };
>> - };
>> - };
>> -
>> - macb1: ethernet at f8030000 {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&pinctrl_macb1_rmii>;
>> };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
>> index 1a3d525..8eac66c 100644
>> --- a/arch/arm/boot/dts/at91sam9x35.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x35.dtsi
>> @@ -7,6 +7,7 @@
>> */
>>
>> #include "at91sam9x5.dtsi"
>> +#include "at91sam9x5_macb0.dtsi"
>>
>> / {
>> model = "Atmel AT91SAM9X35 SoC";
>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
>> index 57d45f5..05f4c74 100644
>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>> @@ -206,29 +206,6 @@
>> };
>> };
>>
>> - usart3 {
>> - pinctrl_usart3: usart3-0 {
>> - atmel,pins =
>> - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>> - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
>> - };
>> -
>> - pinctrl_usart3_rts: usart3_rts-0 {
>> - atmel,pins =
>> - <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
>> - };
>> -
>> - pinctrl_usart3_cts: usart3_cts-0 {
>> - atmel,pins =
>> - <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
>> - };
>> -
>> - pinctrl_usart3_sck: usart3_sck-0 {
>> - atmel,pins =
>> - <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
>> - };
>> - };
>> -
>> uart0 {
>> pinctrl_uart0: uart0-0 {
>> atmel,pins =
>> @@ -277,34 +254,6 @@
>> };
>> };
>>
>> - macb0 {
>> - pinctrl_macb0_rmii: macb0_rmii-0 {
>> - atmel,pins =
>> - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
>> - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
>> - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
>> - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
>> - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
>> - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
>> - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
>> - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
>> - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
>> - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
>> - };
>> -
>> - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>> - atmel,pins =
>> - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
>> - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
>> - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
>> - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
>> - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
>> - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
>> - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
>> - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
>> - };
>> - };
>> -
>> mmc0 {
>> pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
>> atmel,pins =
>> @@ -605,22 +554,6 @@
>> status = "disabled";
>> };
>>
>> - macb0: ethernet at f802c000 {
>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>> - reg = <0xf802c000 0x100>;
>> - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&pinctrl_macb0_rmii>;
>> - status = "disabled";
>> - };
>> -
>> - macb1: ethernet at f8030000 {
>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>> - reg = <0xf8030000 0x100>;
>> - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>> - status = "disabled";
>> - };
>> -
>> i2c0: i2c at f8010000 {
>> compatible = "atmel,at91sam9x5-i2c";
>> reg = <0xf8010000 0x100>;
>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>> new file mode 100644
>> index 0000000..55731ff
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>> @@ -0,0 +1,56 @@
>> +/*
>> + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
>> + * Ethernet interface.
>> + *
>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>> + *
>> + * Licensed under GPLv2.
>> + */
>> +
>> +#include <dt-bindings/pinctrl/at91.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +/ {
>> + ahb {
>> + apb {
>> + pinctrl at fffff400 {
>> + macb0 {
>> + pinctrl_macb0_rmii: macb0_rmii-0 {
>> + atmel,pins =
>> + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
>> + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
>> + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
>> + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
>> + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
>> + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
>> + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
>> + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
>> + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
>> + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
>> + };
>> +
>> + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>> + atmel,pins =
>> + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
>> + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
>> + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
>> + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
>> + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
>> + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
>> + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
>> + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
>> + };
>> + };
>> + };
>> +
>> + macb0: ethernet at f802c000 {
>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>> + reg = <0xf802c000 0x100>;
>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_macb0_rmii>;
>> + status = "disabled";
>> + };
>> + };
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>> new file mode 100644
>> index 0000000..77425a6
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>> @@ -0,0 +1,44 @@
>> +/*
>> + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
>> + * Ethernet interfaces.
>> + *
>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>> + *
>> + * Licensed under GPLv2.
>> + */
>> +
>> +#include <dt-bindings/pinctrl/at91.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +/ {
>> + ahb {
>> + apb {
>> + pinctrl at fffff400 {
>> + macb1 {
>> + pinctrl_macb1_rmii: macb1_rmii-0 {
>> + atmel,pins =
>> + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
>> + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
>> + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
>> + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
>> + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
>> + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
>> + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
>> + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
>> + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
>> + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
>> + };
>> + };
>> + };
>> +
>> + macb1: ethernet at f8030000 {
>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>> + reg = <0xf8030000 0x100>;
>> + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_macb1_rmii>;
>> + status = "disabled";
>> + };
>> + };
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>> new file mode 100644
>> index 0000000..5589579
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>> @@ -0,0 +1,51 @@
>> +/*
>> + * at91sam9x5_lcdc.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
>> + * 4 USART.
>> + *
>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
>> + *
>> + * Licensed under GPLv2.
>> + */
>> +
>> +#include <dt-bindings/pinctrl/at91.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +/ {
>> + ahb {
>> + apb {
>> + pinctrl at fffff400 {
>> + usart3 {
>> + pinctrl_usart3: usart3-0 {
>> + atmel,pins =
>> + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>> + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
>> + };
>> +
>> + pinctrl_usart3_rts: usart3_rts-0 {
>> + atmel,pins =
>> + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
>> + };
>> +
>> + pinctrl_usart3_cts: usart3_cts-0 {
>> + atmel,pins =
>> + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
>> + };
>> +
>> + pinctrl_usart3_sck: usart3_sck-0 {
>> + atmel,pins =
>> + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
>> + };
>> + };
>> + };
>> +
>> + usart3: serial at f8028000 {
>> + compatible = "atmel,at91sam9260-usart";
>> + reg = <0xf8028000 0x200>;
>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usart3>;
>> + status = "disabled";
>> + };
>> + };
>> + };
>> +};
>> --
>> 1.7.9.5
>>
More information about the linux-arm-kernel
mailing list